Sound Upgrade

With our system, consisting of vehicle-specific adapters, the corresponding connections, installation accessories such as alubutyl insulation material and high-quality car hi-fi components such as power amplifiers and speakers, we offer you everything you need for a successful sound upgrade in your customer's vehicle.

Flyer acv insulation material

DLS catalogue

Advantages of our solution

acv sound upgrade
Vehicle-specific adapters such as loudspeaker rings and facia plates and the associated connections
Our product portfolio offers you everything you need for a successful sound upgrade in your customer's vehicle
High quality car hi-fi components from DLS

Configure solution

2-Channel
Performance 300 W RAW 2 Channel Amplifier 2 x 70 WRMS
            
P20 is a small and powerful amplifier with a peak power output of 2 x 70 Watts. In 4 ohm mono bridge-connection, it puts out all of 200 Watts.

Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.
The high-pass filter is also variable between 50 and 500 Hz.
Built-in protection circuits shut down the amplifier in the event of overloads.
High level input with AUTO-start function makes it easier to connect to factory installed head units.
Bass EQ function in two steps, +6dB or +12 dB.


SQ tuned in England!

Specifications
            
Number of channels            2
Amplifier class            AB
Mono bridge mode 4 ohm            200 Watt
Output power in 2 ohm            2 x 100 Watt
Output power in 4 ohm            2 x 70 Watt vid 0,1% THD
Damping factor            > 80
S/N ratio, A-weighted            > 95 dB
Frequency range            10 Hz - 30 kHz
Input sensitivity            0,25 - 5 Volt
Input impedance            22 kohm
Input impedance, high level            47 ohm
High pass filter            50 - 500 Hz
Low pass filter            50 - 500 Hz
Grand bass filter            Bass EQ +6dB / +12 dB @ 50 Hz
Low level output            No
High level input with auto start            Yes
Power consumption (idle)            0,4 A
Power consumption (max)            25 A
Rec. power cable            16 sq mm ( 5 AWG)
Fuses            1 x 25 A
Dimension (W x D x H)            189 x 210 x 46 mm ( 744" x 8,26" x 1,81")
Weight            2 kg

CA-P20
Performance RAW 2 Channel Amplifier 2 x 70 WRMS
Performance 300 W RAW 2 Channel Amplifier 2 x 70 WRMS
            
P20 is a small and powerful amplifier with a peak power output of 2 x 70 Watts. In 4 ohm mono bridge-connection, it puts out all of 200 Watts.

Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.
The high-pass filter is also variable between 50 and 500 Hz.
Built-in protection circuits shut down the amplifier in the event of overloads.
High level input with AUTO-start function makes it easier to connect to factory installed head units.
Bass EQ function in two steps, +6dB or +12 dB.


SQ tuned in England!

Specifications
            
Number of channels            2
Amplifier class            AB
Mono bridge mode 4 ohm            200 Watt
Output power in 2 ohm            2 x 100 Watt
Output power in 4 ohm            2 x 70 Watt vid 0,1% THD
Damping factor            > 80
S/N ratio, A-weighted            > 95 dB
Frequency range            10 Hz - 30 kHz
Input sensitivity            0,25 - 5 Volt
Input impedance            22 kohm
Input impedance, high level            47 ohm
High pass filter            50 - 500 Hz
Low pass filter            50 - 500 Hz
Grand bass filter            Bass EQ +6dB / +12 dB @ 50 Hz
Low level output            No
High level input with auto start            Yes
Power consumption (idle)            0,4 A
Power consumption (max)            25 A
Rec. power cable            16 sq mm ( 5 AWG)
Fuses            1 x 25 A
Dimension (W x D x H)            189 x 210 x 46 mm ( 744" x 8,26" x 1,81")
Weight            2 kg

CA-P20
Performance RAW 2 Channel Amplifier 2 x 70 WRMS
2 Channel Amplifier 2 x 170 WRMS

            
The new improved CCi2 is a small and powerful amplifier with a RMS power output of 2 x 170 Watts. In 4 ohm mono bridge-connection, it puts out all of 340 Watts.

Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.
The high-pass filter is also variable between 50 and 500 Hz.
Built-in protection circuits shut down the amplifier in the event of overloads.
High level input with AUTO-start function makes it easier to connect to factory installed head units.
Bass EQ variabel fron 0 till +6dB.
THD at 5W, 1 kHz: 150
Signal to noise ratio, A-weighted: 110 dB

Specifications            

Number of channels            2
Amplifier class            AB
Mono bridge mode 4 ohm            340 Watt
Output power in 2 ohm            2 x 170 Watt
Output power in 4 ohm            2 x 110 Watt
Damping factor            > 150
S/N ratio, A-weighted            > 110 dB
Frequency range            10 Hz - 50 kHz
Input sensitivity            1 - 4 Volt
Input impedance            6 kohm
Input impedance, high level            45 ohm
High pass filter            50 - 500 Hz
Low pass filter            50 - 500 Hz
Grand bass filter            Bass EQ +6dB @ 60 Hz
Low level output            No
High level input with auto start            Yes
Power consumption (idle)            0,5 A
Power consumption (max)            43 A
Integrated fan            Yes
Fuses            Use external fuse 40A
Dimension (W x D x H)            129 x 260 x 54 mm ( 5,1" x 10,2" x 2,1")
Weight            1,87 kg

CA-CCi2
Reference Line 2 Channel Amplifier 2 x 170 WRMS
2 Channel Amplifier 2 x 170 WRMS

            
The new improved CCi2 is a small and powerful amplifier with a RMS power output of 2 x 170 Watts. In 4 ohm mono bridge-connection, it puts out all of 340 Watts.

Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.
The high-pass filter is also variable between 50 and 500 Hz.
Built-in protection circuits shut down the amplifier in the event of overloads.
High level input with AUTO-start function makes it easier to connect to factory installed head units.
Bass EQ variabel fron 0 till +6dB.
THD at 5W, 1 kHz: 150
Signal to noise ratio, A-weighted: 110 dB

Specifications            

Number of channels            2
Amplifier class            AB
Mono bridge mode 4 ohm            340 Watt
Output power in 2 ohm            2 x 170 Watt
Output power in 4 ohm            2 x 110 Watt
Damping factor            > 150
S/N ratio, A-weighted            > 110 dB
Frequency range            10 Hz - 50 kHz
Input sensitivity            1 - 4 Volt
Input impedance            6 kohm
Input impedance, high level            45 ohm
High pass filter            50 - 500 Hz
Low pass filter            50 - 500 Hz
Grand bass filter            Bass EQ +6dB @ 60 Hz
Low level output            No
High level input with auto start            Yes
Power consumption (idle)            0,5 A
Power consumption (max)            43 A
Integrated fan            Yes
Fuses            Use external fuse 40A
Dimension (W x D x H)            129 x 260 x 54 mm ( 5,1" x 10,2" x 2,1")
Weight            1,87 kg

CA-CCi2
Reference Line 2 Channel Amplifier 2 x 170 WRMS
24 Volt
24 Volt 3 Channel digital Amplifier 2x80 Watts + 1x200 WRMS
            
DD31T is a small and powerful class D amplifier with power output of 2 x 125 + 1x 350 Watts RMS in 2 ohm, and in 4 ohm 2 x 80 + 1 x 200 Watts.
A good sounding amplifier for both amateurs and professionells.

Built-in/switchable low pass and high pass filters.
Damping factor >80
Signal to noise ratio, A-weighted: 90 dB
AUX input
Hi level input with Auto start
            
Specifications
            
Number of channels            3
Amplifier class            D
Output power in 2 ohm            2 x 125 Watt
Output power in 4 ohm            2 x 80 Watt
Mono sub channel 2 ohm            350 Watt
Mono sub channel 4 ohm            200 Watt
Damping factor            >80
S/N ratio, A-weighted            >90 dB
Frequency range            10 Hz - 20 kHz
Input sensitivity            1 - 4 Volt
Input impedance            22 kohm
Input impedance, high level            40 ohm
High level input with auto start            Yes
Remote bass level control            Yes
Low level output            Yes
Remote phase shift control            No
Low pass filter            50-250 Hz
High pass filter            40-400 Hz
Grand bass filter            +0-18 dB
Power consumption (idle)            0,6 A
Power consumption (max)            60 A
Fuses            use external fuse
Dimension (W x D x H)            103 x 215 x 35 (4,0 x 8,5 x 1,4)
Weight            3 kg
EAN Bar code            7331644030201

CA-DD31T
24 Volt 3 Channel Class D Amplifier 2x80 WRMS + 1x200 WRMS
24 Volt 3 Channel digital Amplifier 2x80 Watts + 1x200 WRMS
            
DD31T is a small and powerful class D amplifier with power output of 2 x 125 + 1x 350 Watts RMS in 2 ohm, and in 4 ohm 2 x 80 + 1 x 200 Watts.
A good sounding amplifier for both amateurs and professionells.

Built-in/switchable low pass and high pass filters.
Damping factor >80
Signal to noise ratio, A-weighted: 90 dB
AUX input
Hi level input with Auto start
            
Specifications
            
Number of channels            3
Amplifier class            D
Output power in 2 ohm            2 x 125 Watt
Output power in 4 ohm            2 x 80 Watt
Mono sub channel 2 ohm            350 Watt
Mono sub channel 4 ohm            200 Watt
Damping factor            >80
S/N ratio, A-weighted            >90 dB
Frequency range            10 Hz - 20 kHz
Input sensitivity            1 - 4 Volt
Input impedance            22 kohm
Input impedance, high level            40 ohm
High level input with auto start            Yes
Remote bass level control            Yes
Low level output            Yes
Remote phase shift control            No
Low pass filter            50-250 Hz
High pass filter            40-400 Hz
Grand bass filter            +0-18 dB
Power consumption (idle)            0,6 A
Power consumption (max)            60 A
Fuses            use external fuse
Dimension (W x D x H)            103 x 215 x 35 (4,0 x 8,5 x 1,4)
Weight            3 kg
EAN Bar code            7331644030201

CA-DD31T
24 Volt 3 Channel Class D Amplifier 2x80 WRMS + 1x200 WRMS
3-Channel
12 Volt 3 Channel digital Amplifier 2x80 WRMS + 1x200 WRMS ANNIVERSARY EDITION

CA-DD33-40
12 Volt 3 Channel Class D Amplifier 2x80 WRMS + 1x200 WRMS
12 Volt 3 Channel digital Amplifier 2x80 WRMS + 1x200 WRMS ANNIVERSARY EDITION

CA-DD33-40
12 Volt 3 Channel Class D Amplifier 2x80 WRMS + 1x200 WRMS
4-Channel
4 channel amplifier, ANNIVERSARY EDITION

CA-CCi44-40
4 channel amplifier 4 x 110 WRMS, ANNIVERSARY EDITION
4 channel amplifier, ANNIVERSARY EDITION

CA-CCi44-40
4 channel amplifier 4 x 110 WRMS, ANNIVERSARY EDITION
Performance 600 W RAW 4 Channel Amplifier 4 x 70 Watts

P40 is a small and powerful amplifier with power output of 4 x 70 Watts peak power, and in mono bridge-connection, it puts out all of 2 x 200 Watts.

Built-in/switchable low pass and high pass filters.
Bass EQ @ 50 Hz: + 6dB / + 12 dB.
Built-in protection circuits shut down the amplifier in the event of overloads.
Hi level input with Auto start
Use it for a front system and a subwoofer.

SQ tuned in England!

Specifications
            
Number of channels            4
Amplifier class            AB
Peak power            4 x 150 Watt
Output power in 2 ohm            4 x 100 Watt
Output power in 4 ohm            4 x 70 Watt
Mono bridge mode 4 ohm            2 x 200 Watt
Damping factor            >80
S/N ratio, A-weighted            >90 dB
Frequency range            10 Hz - 30 kHz
Input sensitivity            0,25 - 5 Volt
Input impedance            22 kohm
Input impedance, high level            47 ohm
High level input with auto start            Yes
Remote bass level control            No
Low level output            No
Remote phase shift control            No
Grand bass filter            Bass EQ @ 50 Hz: +6db / +12 dB
Power consumption (idle)            0,5 A
Power consumption (max)            50 A
Rec. power cable            16 sq mm ( 5 AWG)
Fuses            2 x 25 A
Dimension (W x D x H)            189 x 322 x 46 mm (7,44" x 12,67" x 1,81")
Weight            3 kg
EAN Bar code            7331644079408

CA-P40
Performance RAW 4 Channel Amplifier 4 x 70 WRMS
Performance 600 W RAW 4 Channel Amplifier 4 x 70 Watts

P40 is a small and powerful amplifier with power output of 4 x 70 Watts peak power, and in mono bridge-connection, it puts out all of 2 x 200 Watts.

Built-in/switchable low pass and high pass filters.
Bass EQ @ 50 Hz: + 6dB / + 12 dB.
Built-in protection circuits shut down the amplifier in the event of overloads.
Hi level input with Auto start
Use it for a front system and a subwoofer.

SQ tuned in England!

Specifications
            
Number of channels            4
Amplifier class            AB
Peak power            4 x 150 Watt
Output power in 2 ohm            4 x 100 Watt
Output power in 4 ohm            4 x 70 Watt
Mono bridge mode 4 ohm            2 x 200 Watt
Damping factor            >80
S/N ratio, A-weighted            >90 dB
Frequency range            10 Hz - 30 kHz
Input sensitivity            0,25 - 5 Volt
Input impedance            22 kohm
Input impedance, high level            47 ohm
High level input with auto start            Yes
Remote bass level control            No
Low level output            No
Remote phase shift control            No
Grand bass filter            Bass EQ @ 50 Hz: +6db / +12 dB
Power consumption (idle)            0,5 A
Power consumption (max)            50 A
Rec. power cable            16 sq mm ( 5 AWG)
Fuses            2 x 25 A
Dimension (W x D x H)            189 x 322 x 46 mm (7,44" x 12,67" x 1,81")
Weight            3 kg
EAN Bar code            7331644079408

CA-P40
Performance RAW 4 Channel Amplifier 4 x 70 WRMS
Performance 1000 W RAW 4 Channel Amplifier 4 x 100 Watts

P44 is a small and powerful amplifier with power output of 4 x 100 Watts peak power, and in mono bridge-connection, it puts out all of 2 x 280 Watts.

Built-in/switchable low pass and high pass filters.
Bass EQ @ 50 Hz: + 6dB.
Built-in protection circuits shut down the amplifier in the event of overloads.
Hi level input with Auto start
Use it for a front system and a subwoofer.

SQ tuned in England!

Specifications            

Number of channels            4
Amplifier class            AB
Output power in 2 ohm            4 x 140 Watt
Output power in 4 ohm            4 x 100 Watt
Mono bridge mode 4 ohm            2 x 280 Watt
Damping factor            >80
S/N ratio, A-weighted            >95 dB
Frequency range            10 Hz - 30 kHz
Input sensitivity            0,25 - 5 Volt
Input impedance            22 kohm
Input impedance, high level            47 ohm
High level input with auto start            Yes
Remote bass level control            No
Low level output            No
Remote phase shift control            No
Grand bass filter            Bass EQ @ 50 Hz: +6db
Power consumption (idle)            0,7 A
Power consumption (max)            80 A
Rec. power cable            16 sq mm ( 5 AWG)
Fuses            2 x 40 A
Dimension (W x D x H)            189 x 400 x 46 mm (7,44" x 12,67" x 1,81")
Weight            4 kg
EAN Bar code            7331644079408

CA-P44
Performance RAW 4 Channel Amplifier 4 x 100 WRMS
Performance 1000 W RAW 4 Channel Amplifier 4 x 100 Watts

P44 is a small and powerful amplifier with power output of 4 x 100 Watts peak power, and in mono bridge-connection, it puts out all of 2 x 280 Watts.

Built-in/switchable low pass and high pass filters.
Bass EQ @ 50 Hz: + 6dB.
Built-in protection circuits shut down the amplifier in the event of overloads.
Hi level input with Auto start
Use it for a front system and a subwoofer.

SQ tuned in England!

Specifications            

Number of channels            4
Amplifier class            AB
Output power in 2 ohm            4 x 140 Watt
Output power in 4 ohm            4 x 100 Watt
Mono bridge mode 4 ohm            2 x 280 Watt
Damping factor            >80
S/N ratio, A-weighted            >95 dB
Frequency range            10 Hz - 30 kHz
Input sensitivity            0,25 - 5 Volt
Input impedance            22 kohm
Input impedance, high level            47 ohm
High level input with auto start            Yes
Remote bass level control            No
Low level output            No
Remote phase shift control            No
Grand bass filter            Bass EQ @ 50 Hz: +6db
Power consumption (idle)            0,7 A
Power consumption (max)            80 A
Rec. power cable            16 sq mm ( 5 AWG)
Fuses            2 x 40 A
Dimension (W x D x H)            189 x 400 x 46 mm (7,44" x 12,67" x 1,81")
Weight            4 kg
EAN Bar code            7331644079408

CA-P44
Performance RAW 4 Channel Amplifier 4 x 100 WRMS
4 Channel Amplifier 4 x 110 WRMS

The new improved CCi44 is a small and powerful amplifier with power output of 4 x 110 Watts RMS, and in mono bridge-connection, it puts out all of 2 x 220 Watts. A good sounding amplifier for both amateurs and professionells.

Built-in/switchable low pass and high pass filters.
Damping factor >300
Signal to noise ratio, A-weighted: 110 dB
THD at 5W, 1 kHz. 300
S/N ratio, A-weighted            >110 dB
Frequency range            10 Hz - 60 kHz
Input sensitivity            1 - 4 Volt
Input impedance            6 kohm
Input impedance, high level            45 ohm
High level input with auto start            Yes
Remote bass level control            No
Low level output            No
Remote phase shift control            No
Integrated fan            Yes
Filters channel A & B            HP 50 - 500 Hz, LP 50 - 500 Hz
Filters channel C & D            HP 50 - 500 Hz, LP 50 - 500 Hz
Power consumption (idle)            0,7 A
Power consumption (max)            64 A
Fuses            use external fuse 60A
Dimension (W x D x H)            129 x 320 x 54 mm (5,1" x 12,6" x 2,1")
Weight            2,4 kg
                        

CA-CCi44
Reference Line 4 Channel Amplifier 4 x 110 WRMS
4 Channel Amplifier 4 x 110 WRMS

The new improved CCi44 is a small and powerful amplifier with power output of 4 x 110 Watts RMS, and in mono bridge-connection, it puts out all of 2 x 220 Watts. A good sounding amplifier for both amateurs and professionells.

Built-in/switchable low pass and high pass filters.
Damping factor >300
Signal to noise ratio, A-weighted: 110 dB
THD at 5W, 1 kHz. 300
S/N ratio, A-weighted            >110 dB
Frequency range            10 Hz - 60 kHz
Input sensitivity            1 - 4 Volt
Input impedance            6 kohm
Input impedance, high level            45 ohm
High level input with auto start            Yes
Remote bass level control            No
Low level output            No
Remote phase shift control            No
Integrated fan            Yes
Filters channel A & B            HP 50 - 500 Hz, LP 50 - 500 Hz
Filters channel C & D            HP 50 - 500 Hz, LP 50 - 500 Hz
Power consumption (idle)            0,7 A
Power consumption (max)            64 A
Fuses            use external fuse 60A
Dimension (W x D x H)            129 x 320 x 54 mm (5,1" x 12,6" x 2,1")
Weight            2,4 kg
                        

CA-CCi44
Reference Line 4 Channel Amplifier 4 x 110 WRMS
4 Channel Amplifier 4 x 70 WRMS

The new improved CCi4 is a small and powerful amplifier with power output of 4 x 70 Watts RMS, and in mono bridge-connection, it puts out all of 2 x 140 Watts. A good sounding amplifier for both amateurs and professionells.

Built-in/switchable low pass and high pass filters.
Damping factor >250
Signal to noise ratio, A-weighted: 110 dB
THD at 5W, 1 kHz. 250
S/N ratio, A-weighted            >110 dB
Frequency range            10 Hz - 55 kHz
Input sensitivity            1 - 4 Volt
Input impedance            6 kohm
Input impedance, high level            45 ohm
High level input with auto start            Yes
Remote bass level control            No
Low level output            No
Remote phase shift control            No
Filters channel A & B            HP 50 - 500 Hz, LP 50 - 500 Hz
Filters channel C & D            HP 50 - 500 Hz, LP 50 - 500 Hz
Power consumption (idle)            0,5 A
Power consumption (max)            40 A
Fuses            use external fuse 40A
Dimension (W x D x H)            129 x 320 x 54 mm (5,1" x 12,6" x 2,1")
Weight            1,8 kg

CA-CCi4
Reference Line 4 Channel Amplifier 4 x 70 WRMS
4 Channel Amplifier 4 x 70 WRMS

The new improved CCi4 is a small and powerful amplifier with power output of 4 x 70 Watts RMS, and in mono bridge-connection, it puts out all of 2 x 140 Watts. A good sounding amplifier for both amateurs and professionells.

Built-in/switchable low pass and high pass filters.
Damping factor >250
Signal to noise ratio, A-weighted: 110 dB
THD at 5W, 1 kHz. 250
S/N ratio, A-weighted            >110 dB
Frequency range            10 Hz - 55 kHz
Input sensitivity            1 - 4 Volt
Input impedance            6 kohm
Input impedance, high level            45 ohm
High level input with auto start            Yes
Remote bass level control            No
Low level output            No
Remote phase shift control            No
Filters channel A & B            HP 50 - 500 Hz, LP 50 - 500 Hz
Filters channel C & D            HP 50 - 500 Hz, LP 50 - 500 Hz
Power consumption (idle)            0,5 A
Power consumption (max)            40 A
Fuses            use external fuse 40A
Dimension (W x D x H)            129 x 320 x 54 mm (5,1" x 12,6" x 2,1")
Weight            1,8 kg

CA-CCi4
Reference Line 4 Channel Amplifier 4 x 70 WRMS
Accessories DLS
High Level Line Output Converter with autosense/bass remote

This converter is designed for use with head units in cars without RCA low level output from the head unit. Most modern car amplifiers are equipped with high level inputs and these work OK with older factory radios but often will not work with modern head units especially if they have digital output chips.

This converter is designed to work with all head units thanks to fully balanced input circuits.
The converter can be used for both 2 -and 4 -channel amplifiers and have up to 3v output to minimize noise in amp input section. Perfect for adding subwoofer to a OEM system with the EBC external remote.

Note: If using in 2 channel mode channels 1 & 2 must be connected for the signal sensing circuit to function.

Technical facts HLC4

Number of channels: 4
Power supply: 12 V DC (min 10,8, max 15,6V)
Current draw, no signal: 4 mA
Current draw, operational: Typical 25 mA
Output voltage: 3 V RMS
Distortion: 0,002% THD @ 3V output, 10 kohm load
Clip point: 3,7 V RMS @ 14,4 V power supply
Output impedance: 200 ohms nominal
Input impedance: Ch. 1: 44 ohms, Ch. 2-4: 100 ohms, All channels are fully balanced
Sensing modes: DC level or Audio, both operate on Ch. 1 only.
Remote output: 12 Volts, max 100 ma max, protected against short term short circuit
Indicators: Green= Remote on, Blue = Audio sensing active
Reverse polarity protected.Summing output ch 3 + 4 for subwoofer amp when used with optional EBC

CA-HLC4.2
High Level Line Output Converter with autosense/bass remote
High Level Line Output Converter with autosense/bass remote

This converter is designed for use with head units in cars without RCA low level output from the head unit. Most modern car amplifiers are equipped with high level inputs and these work OK with older factory radios but often will not work with modern head units especially if they have digital output chips.

This converter is designed to work with all head units thanks to fully balanced input circuits.
The converter can be used for both 2 -and 4 -channel amplifiers and have up to 3v output to minimize noise in amp input section. Perfect for adding subwoofer to a OEM system with the EBC external remote.

Note: If using in 2 channel mode channels 1 & 2 must be connected for the signal sensing circuit to function.

Technical facts HLC4

Number of channels: 4
Power supply: 12 V DC (min 10,8, max 15,6V)
Current draw, no signal: 4 mA
Current draw, operational: Typical 25 mA
Output voltage: 3 V RMS
Distortion: 0,002% THD @ 3V output, 10 kohm load
Clip point: 3,7 V RMS @ 14,4 V power supply
Output impedance: 200 ohms nominal
Input impedance: Ch. 1: 44 ohms, Ch. 2-4: 100 ohms, All channels are fully balanced
Sensing modes: DC level or Audio, both operate on Ch. 1 only.
Remote output: 12 Volts, max 100 ma max, protected against short term short circuit
Indicators: Green= Remote on, Blue = Audio sensing active
Reverse polarity protected.Summing output ch 3 + 4 for subwoofer amp when used with optional EBC

CA-HLC4.2
High Level Line Output Converter with autosense/bass remote
Amplifier Wiring Kits
Amplifier install kit LK-10

5 m power cable 10 mm² red
1 m power cable 10 mm²
1 x AGU in-line fuse holder silver
1 x 40 A AGU on-line fuse silver
5 m RCA cable / remote cable blue
2 spade terminals
2 ring terminals

LK-10
Low cost installation complete set 10 mm²
Amplifier install kit LK-10

5 m power cable 10 mm² red
1 m power cable 10 mm²
1 x AGU in-line fuse holder silver
1 x 40 A AGU on-line fuse silver
5 m RCA cable / remote cable blue
2 spade terminals
2 ring terminals

LK-10
Low cost installation complete set 10 mm²
Amplifier Install Kit WK-10

5 m power cable 10 mm² red
1 m power cable 10 mm² black
10 m speaker cable 2 x 1,5 mm²
1 x AGU in-line fuse holder gold
1 x 40 A AGU in-line fuse gold
5 m RCA cable with remote blue
2 spade terminals
2 ring terminals

WK-10
Installation complete set 10 mm²
Amplifier Install Kit WK-10

5 m power cable 10 mm² red
1 m power cable 10 mm² black
10 m speaker cable 2 x 1,5 mm²
1 x AGU in-line fuse holder gold
1 x 40 A AGU in-line fuse gold
5 m RCA cable with remote blue
2 spade terminals
2 ring terminals

WK-10
Installation complete set 10 mm²
Amplifier Install Kit LK-20  

5 m power cable 20 mm² red
1 m power cable 20 mm² black
1 x AGU in-line fuse holder silver
1 x 60 A AGU on-line fuse silver
5 m RCA cable with remote blue
2 spade terminals
2 ring terminals

LK-20
Low Cost installation complete set 20 mm²
Amplifier Install Kit LK-20  

5 m power cable 20 mm² red
1 m power cable 20 mm² black
1 x AGU in-line fuse holder silver
1 x 60 A AGU on-line fuse silver
5 m RCA cable with remote blue
2 spade terminals
2 ring terminals

LK-20
Low Cost installation complete set 20 mm²
Amplifier Install Kit WK-20  

5 m power cable 20 mm² red
1 m power cable 20 mm² black
10 m speaker cable 2 x 2,5 mm²
1 x AGU in-line fuse holder gold
1 x 60 A AGU in-line fuse gold
5 m RCA cable with remote blue
2 spade terminals
2 ring terminals

WK-20
Installation complete set 20 mm²
Amplifier Install Kit WK-20  

5 m power cable 20 mm² red
1 m power cable 20 mm² black
10 m speaker cable 2 x 2,5 mm²
1 x AGU in-line fuse holder gold
1 x 60 A AGU in-line fuse gold
5 m RCA cable with remote blue
2 spade terminals
2 ring terminals

WK-20
Installation complete set 20 mm²
Amplifier install kit WK-35

5 m power cable 35 mm² red
1 m power cable 35 mm² black
10 m speaker cable 2 x 2,5 mm²
1 x ANL in-line fuse holder silver
1 x 100 A ANL in-line fuse gold silver
5 m RCA cable with remote blue
2 spade terminals
2 ring terminals

WK-35
Installation complete set 35 mm²
Amplifier install kit WK-35

5 m power cable 35 mm² red
1 m power cable 35 mm² black
10 m speaker cable 2 x 2,5 mm²
1 x ANL in-line fuse holder silver
1 x 100 A ANL in-line fuse gold silver
5 m RCA cable with remote blue
2 spade terminals
2 ring terminals

WK-35
Installation complete set 35 mm²
Amplifier install kit LK-35

5 m power cable 35 mm²
1 m ground cable 35 mm²
5 m twisted RCA cable
5 m remote cable
ANL in-line fuse holder
installation hardware

LK-35
Low Cost intallation complete set 35 mm²
Amplifier install kit LK-35

5 m power cable 35 mm²
1 m ground cable 35 mm²
5 m twisted RCA cable
5 m remote cable
ANL in-line fuse holder
installation hardware

LK-35
Low Cost intallation complete set 35 mm²
Amplifier Install Kit LK-6

5 m power cable 6,00 mm² red
0,8 m power cable 6,00 mm² black
1 x AGU in-line fuse holder silver with 1 x AGU in-line fuse (30A) gold
5 m RCA cable / remote cable blue
2 spade terminals
2 ring terminals

LK-6
Low Cost installation complete set 6.00 mm²
Amplifier Install Kit LK-6

5 m power cable 6,00 mm² red
0,8 m power cable 6,00 mm² black
1 x AGU in-line fuse holder silver with 1 x AGU in-line fuse (30A) gold
5 m RCA cable / remote cable blue
2 spade terminals
2 ring terminals

LK-6
Low Cost installation complete set 6.00 mm²
Basic
RCA cable 2-plug->2-plug 5 m

311490-06
RCA cable 2-plug->2-plug 5 m
RCA cable 2-plug->2-plug 5 m

311490-06
RCA cable 2-plug->2-plug 5 m
RCA cable 2-plug->2-plug 5 m

311490-06-0
RCA cable 2-plug->2-plug 5 m bulk
RCA cable 2-plug->2-plug 5 m

311490-06-0
RCA cable 2-plug->2-plug 5 m bulk
Blade Terminals Loudspeaker
Flat plug connector

2 x red (4,8 mm) + 2 x black (2,4 mm)

colour: gold

30.4500-00
Flat plug connectors 2 x 2,8mm black / 2 x 4,8mm red
Flat plug connector

2 x red (4,8 mm) + 2 x black (2,4 mm)

colour: gold

30.4500-00
Flat plug connectors 2 x 2,8mm black / 2 x 4,8mm red
Flat plug connectors

2,8 mm

colour: black
contents: 50 pieces

30.4528-03
Flat plug connectors 2,8 mm black 50 pieces
Flat plug connectors

2,8 mm

colour: black
contents: 50 pieces

30.4528-03
Flat plug connectors 2,8 mm black 50 pieces
Flat plug connector

4,8 mm

colour: red
contents: 50 pieces

30.4548-02
Flat plug connectors 4,8 mm red 50 pieces
Flat plug connector

4,8 mm

colour: red
contents: 50 pieces

30.4548-02
Flat plug connectors 4,8 mm red 50 pieces
Blister 10.0 mm²
Power cable red 10,00 mm²

Ø: 10,00 mm²
length: 5 meter
strands: 882* 0,12 mm
colour: red

50-100-005
Power cable 10,00 mm² red 5 meter
Power cable red 10,00 mm²

Ø: 10,00 mm²
length: 5 meter
strands: 882* 0,12 mm
colour: red

50-100-005
Power cable 10,00 mm² red 5 meter
Power cable black 10,00 mm²

Ø: 10,00 mm²
length: 1 meter
strands: 882* 0,12 mm
colour: black

50-100-001
Power cable 10,00 mm² black 1 meter
Power cable black 10,00 mm²

Ø: 10,00 mm²
length: 1 meter
strands: 882* 0,12 mm
colour: black

50-100-001
Power cable 10,00 mm² black 1 meter
Coaxial Speaker
4 inch Performance Coaxial 50 WRMS - inline X-Over
            
Performance series M224 is a 10 cm (4") 2- way coaxial speaker with a 16 mm tweeter.
Small installation depth, only 48 mm
Polypropylene cone and rubber surround
Crossover with 6 dB slope.
Grilles are included.

Specifications
            
Woofer size            10 cm (4")
Tweeter            16 mm (0,63") mylar
Power handling capacity            50 W RMS / 75 W max. 150 W peak
Impedance            4 ohm
Frequency range            75 - 18.000 Hz
Sensitivity            85 dB (1W/1m)
Outer diameter of woofer            100 mm (4")
Magnet size            80 mm (3,15")
Mounting depth            48 mm ( 1,89")
Mounting hole            97 mm (3,82")
EAN Bar code            7331644825104

CC-M224
4" Performance Coaxial - inline X-Over 50 WRMS
4 inch Performance Coaxial 50 WRMS - inline X-Over
            
Performance series M224 is a 10 cm (4") 2- way coaxial speaker with a 16 mm tweeter.
Small installation depth, only 48 mm
Polypropylene cone and rubber surround
Crossover with 6 dB slope.
Grilles are included.

Specifications
            
Woofer size            10 cm (4")
Tweeter            16 mm (0,63") mylar
Power handling capacity            50 W RMS / 75 W max. 150 W peak
Impedance            4 ohm
Frequency range            75 - 18.000 Hz
Sensitivity            85 dB (1W/1m)
Outer diameter of woofer            100 mm (4")
Magnet size            80 mm (3,15")
Mounting depth            48 mm ( 1,89")
Mounting hole            97 mm (3,82")
EAN Bar code            7331644825104

CC-M224
4" Performance Coaxial - inline X-Over 50 WRMS
4" Performance Coaxial 60 WRMS - Separate X-Over

Performance series M524 is a 10 cm (4") 2-way coaxial speaker with a 20 mm silk dome tweeter that guarantees a fantastic sound quality in any installation.

Separate filter box with high class components.
Grilles are included.

Specifications            

Woofer size            10 cm (4")
Tweeter            20 mm (0,8") silk dome
Power handling capacity            60 W RMS / 90 W max, 180 W peak power
Impedance            4 ohm
Frequency range            60 - 20.000 Hz
Sensitivity            80 dB (1W/1m)
Crossover            Box filter with 6dB slope (HP)
Outer diameter of woofer            102 mm (4")
Cone material            Coated paper cone
Magnet size            80 mm (3,15")
Mounting depth            60 mm ( 2,36")
Mounting hole            97 mm (3,81")
Size of filter box            73 x 36 x 35 mm
EAN Bar code            7331644821908

CC-M524
4" Performance Coaxial - separate X-Over 60 WRMS
4" Performance Coaxial 60 WRMS - Separate X-Over

Performance series M524 is a 10 cm (4") 2-way coaxial speaker with a 20 mm silk dome tweeter that guarantees a fantastic sound quality in any installation.

Separate filter box with high class components.
Grilles are included.

Specifications            

Woofer size            10 cm (4")
Tweeter            20 mm (0,8") silk dome
Power handling capacity            60 W RMS / 90 W max, 180 W peak power
Impedance            4 ohm
Frequency range            60 - 20.000 Hz
Sensitivity            80 dB (1W/1m)
Crossover            Box filter with 6dB slope (HP)
Outer diameter of woofer            102 mm (4")
Cone material            Coated paper cone
Magnet size            80 mm (3,15")
Mounting depth            60 mm ( 2,36")
Mounting hole            97 mm (3,81")
Size of filter box            73 x 36 x 35 mm
EAN Bar code            7331644821908

CC-M524
4" Performance Coaxial - separate X-Over 60 WRMS
5.25 inch Performance Coaxial 50 WRMS - inline X-Over

Performance series M225 is a 13 cm (5,25") 2- way coaxial speaker with a 16 mm tweeter.
Small installation depth, only 43 mm
Fibre glass cone and rubber surround
Crossover has a 6/12 dB slope.
Grilles are included.

Specifications
            
Woofer size            13 cm (5,25")
Tweeter            16 mm (0,63") mylar
Power handling capacity            50 W RMS / 75 W max. 150 W peak
Impedance            4 ohm
Frequency range            75 - 18.000 Hz
Sensitivity            85 dB (1W/1m)
Crossover            Cable filter with 6/12 dB slope (LP/HP)
Outer diameter of woofer            130 mm (5,12")
Magnet size            80 mm (3,15")
Mounting depth            43 mm ( 1,7")
Mounting hole            120 mm (4,72")
EAN Bar code            7331644822103

CC-M225
5.25" Performance Coaxial - inline X-Over 50 WRMS
5.25 inch Performance Coaxial 50 WRMS - inline X-Over

Performance series M225 is a 13 cm (5,25") 2- way coaxial speaker with a 16 mm tweeter.
Small installation depth, only 43 mm
Fibre glass cone and rubber surround
Crossover has a 6/12 dB slope.
Grilles are included.

Specifications
            
Woofer size            13 cm (5,25")
Tweeter            16 mm (0,63") mylar
Power handling capacity            50 W RMS / 75 W max. 150 W peak
Impedance            4 ohm
Frequency range            75 - 18.000 Hz
Sensitivity            85 dB (1W/1m)
Crossover            Cable filter with 6/12 dB slope (LP/HP)
Outer diameter of woofer            130 mm (5,12")
Magnet size            80 mm (3,15")
Mounting depth            43 mm ( 1,7")
Mounting hole            120 mm (4,72")
EAN Bar code            7331644822103

CC-M225
5.25" Performance Coaxial - inline X-Over 50 WRMS
6.5 inch Performance Coaxial 50 WRMS- inline  X-Over

Performance series M226 is a16,5 cm (6,5") 2- way coaxial speaker with a 16 mm mylar tweeter.

The small installation depth makes the speaker fit almost everywhere.
Polypropylene cone and foam surround
Crossover has a 6/12 dB slope.
Grilles are included.

Specifications
            
Tweeter            16 mm (0,63") mylar tweeter
Woofer size            16,5 cm (6,5")
Power handling capacity            50 W RMS / 75 W max / 150 W peak power
Impedance            4 ohm
Frequency range            70 - 18.000 Hz
Sensitivity            85 dB (1W/1m)
Crossover            Cable filter with 6/12 dB slope (HP/LP)
Outer diameter of woofer            165 mm (6,5")
Cone material            Polypropylene, foam surround
Magnet size            80 mm (3,15")
Mounting depth            45 mm ( 1,77")
Mounting hole            145 mm (5,7")
EAN Bar code            7331644822202

CC-M226
6.5" Performance Coaxial - inline X-Over 50 WRMS
6.5 inch Performance Coaxial 50 WRMS- inline  X-Over

Performance series M226 is a16,5 cm (6,5") 2- way coaxial speaker with a 16 mm mylar tweeter.

The small installation depth makes the speaker fit almost everywhere.
Polypropylene cone and foam surround
Crossover has a 6/12 dB slope.
Grilles are included.

Specifications
            
Tweeter            16 mm (0,63") mylar tweeter
Woofer size            16,5 cm (6,5")
Power handling capacity            50 W RMS / 75 W max / 150 W peak power
Impedance            4 ohm
Frequency range            70 - 18.000 Hz
Sensitivity            85 dB (1W/1m)
Crossover            Cable filter with 6/12 dB slope (HP/LP)
Outer diameter of woofer            165 mm (6,5")
Cone material            Polypropylene, foam surround
Magnet size            80 mm (3,15")
Mounting depth            45 mm ( 1,77")
Mounting hole            145 mm (5,7")
EAN Bar code            7331644822202

CC-M226
6.5" Performance Coaxial - inline X-Over 50 WRMS
6.5" Performance Coaxial 60 WRMS - Separate X-over
            
Performance series M526 is a 16,5 cm (6,5") 2-way coaxial speaker with a 20 mm silk dome tweeter that guarantees a fantastic sound quality.

Separate filter box with high class components.
Grilles are included.
The small installation depth make it possible to fit in most cars.

Specifications
            
Woofer size            16,5 cm (6,5")
Tweeter            20 mm (0,8") silk dome
Power handling capacity            50 W RMS / 75 W max, 150 W peak power
Impedance            4 ohm
Frequency range            60 - 20.000 Hz
Sensitivity            86 dB (1W/1m)
Crossover            Box filter with 6/12 dB slope (LP/HP)
Outer diameter of woofer            165 mm (6,5")
Cone material            Wowen fibre glass and rubber surround
Magnet size            70 mm (2,75")
Mounting depth            43 mm ( 1,7")
Mounting hole            146 mm (5,75")
Size of filter box            120 x 66 x 33 mm ( 4,72 x 2,6 x 1,3")
EAN Bar code            7331644820307

CC-M526
6.5" Performance Coaxial 60 - separate X-Over 60 WRMS
6.5" Performance Coaxial 60 WRMS - Separate X-over
            
Performance series M526 is a 16,5 cm (6,5") 2-way coaxial speaker with a 20 mm silk dome tweeter that guarantees a fantastic sound quality.

Separate filter box with high class components.
Grilles are included.
The small installation depth make it possible to fit in most cars.

Specifications
            
Woofer size            16,5 cm (6,5")
Tweeter            20 mm (0,8") silk dome
Power handling capacity            50 W RMS / 75 W max, 150 W peak power
Impedance            4 ohm
Frequency range            60 - 20.000 Hz
Sensitivity            86 dB (1W/1m)
Crossover            Box filter with 6/12 dB slope (LP/HP)
Outer diameter of woofer            165 mm (6,5")
Cone material            Wowen fibre glass and rubber surround
Magnet size            70 mm (2,75")
Mounting depth            43 mm ( 1,7")
Mounting hole            146 mm (5,75")
Size of filter box            120 x 66 x 33 mm ( 4,72 x 2,6 x 1,3")
EAN Bar code            7331644820307

CC-M526
6.5" Performance Coaxial 60 - separate X-Over 60 WRMS
6x9" Performance Coaxial 80 WRMS - inline X-Over
            
Performance series M369 is a  6 x 9 3-way triaxial with 2 mid driver and a 25 mm silk dome tweeter.

The bass driver has a cone of woven glass fibre and rubber edge. Together with a powerful magnet system it guarantees a good bass control. Grilles are included.

Small filter boxes with a 12 dB slope crossover to the tweeter and 6 dB to bass and midrange.

Specifications
            
Woofer size            6" x 9" (165 x 236 mm
Tweeter            25 mm (1") tweeter, 45 mm (2") midrange
Power handling capacity            80 W RMS / 120 W max / 200 W peak power
Impedance            4 ohm
Frequency range            50 - 20.000 Hz
Sensitivity            89,3 dB (1W/1m)
Crossover            External filter with 12 and 6 dB slope
Outer diameter of woofer            165 x 236 mm
Magnet size            100 mm (3,94")
Cone material            Woven glass fibre with rubber surround
Mounting depth            86 mm ( 3,38")
Mounting hole            155 x 221 mm (6,1 x 8,7")
Size of filter box            External cable filter
EAN Bar code            7331644820109

CC-M369
6x9" Performance Coaxial - inline X-Over 80 WRMS
6x9" Performance Coaxial 80 WRMS - inline X-Over
            
Performance series M369 is a  6 x 9 3-way triaxial with 2 mid driver and a 25 mm silk dome tweeter.

The bass driver has a cone of woven glass fibre and rubber edge. Together with a powerful magnet system it guarantees a good bass control. Grilles are included.

Small filter boxes with a 12 dB slope crossover to the tweeter and 6 dB to bass and midrange.

Specifications
            
Woofer size            6" x 9" (165 x 236 mm
Tweeter            25 mm (1") tweeter, 45 mm (2") midrange
Power handling capacity            80 W RMS / 120 W max / 200 W peak power
Impedance            4 ohm
Frequency range            50 - 20.000 Hz
Sensitivity            89,3 dB (1W/1m)
Crossover            External filter with 12 and 6 dB slope
Outer diameter of woofer            165 x 236 mm
Magnet size            100 mm (3,94")
Cone material            Woven glass fibre with rubber surround
Mounting depth            86 mm ( 3,38")
Mounting hole            155 x 221 mm (6,1 x 8,7")
Size of filter box            External cable filter
EAN Bar code            7331644820109

CC-M369
6x9" Performance Coaxial - inline X-Over 80 WRMS
7x10" Performance 3 Way 120 WRMS- inline X-Over

Performance series M3710 is a  7 x 10 3-way coaxial with 25 mm silk dome mid driver and a 20 mm mylar  tweeter.

The bass driver has a cone of woven glass fibre and rubber edge. Together with a powerful magnet system it guarantees a good bass control. Grilles are included.

Small filter boxes with a 6 dB slope crossover.

Specifications            

Woofer size            7" x 10" (180 x 250 mm
Tweeter            20 mm (0,8") tweeter, 25 mm (1") midrange
Power handling capacity            120 W RMS / 200 W max / 300 W peak power
Impedance            4 ohm
Frequency range            30 - 20.000 Hz
Sensitivity            90 dB (1W/1m)
Crossover            External woofer filter with 6 dB slope
Outer diameter of woofer            180 x 250 mm
Magnet size            138 mm (5,4")
Cone material            Woven glass fibre with rubber surround
Mounting depth            95 mm ( 3,75")
Mounting hole            170 x 240 mm (6,7 x 9,45")
Size of filter box            Filter box L x W x H 120 x 65 x 32 mm
EAN Bar code            7331644821809

CC-M3710
7x10" Performance Coaxial 3 Way - inline X-Over 120 WRMS
7x10" Performance 3 Way 120 WRMS- inline X-Over

Performance series M3710 is a  7 x 10 3-way coaxial with 25 mm silk dome mid driver and a 20 mm mylar  tweeter.

The bass driver has a cone of woven glass fibre and rubber edge. Together with a powerful magnet system it guarantees a good bass control. Grilles are included.

Small filter boxes with a 6 dB slope crossover.

Specifications            

Woofer size            7" x 10" (180 x 250 mm
Tweeter            20 mm (0,8") tweeter, 25 mm (1") midrange
Power handling capacity            120 W RMS / 200 W max / 300 W peak power
Impedance            4 ohm
Frequency range            30 - 20.000 Hz
Sensitivity            90 dB (1W/1m)
Crossover            External woofer filter with 6 dB slope
Outer diameter of woofer            180 x 250 mm
Magnet size            138 mm (5,4")
Cone material            Woven glass fibre with rubber surround
Mounting depth            95 mm ( 3,75")
Mounting hole            170 x 240 mm (6,7 x 9,45")
Size of filter box            Filter box L x W x H 120 x 65 x 32 mm
EAN Bar code            7331644821809

CC-M3710
7x10" Performance Coaxial 3 Way - inline X-Over 120 WRMS
Component System
Reference 4 inch 2-way Component System with Separate X-Over 60 WRMS

Reference series RC4.2 is a 10 cm (4) 2-way component kit with a separate 25 mm tweeter with copper rings for improved treble sound.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a coated paper cone with rubber edge and a 80 mm powerful magnet that guarantees a good bass control and a fantastic sound. Grilles are included.

Filter boxes with only the best components!

Specifications            

Woofer size            10 cm (4")
Tweeter            RC25, 25 mm (1,25") silk dome tweeter with copper rings
Power handling capacity            60 W RMS / 100 W max / 200 W peak power
Impedance            4 ohm
Frequency range            65 - 22 000 Hz
Sensitivity            86 dB (1W/1m)
Crossover            Filter box with 12 dB slope (HP & LP)
Crossover point (Hz)            4500 Hz
Size of filter box            120 x 66 x 33 mm ( 4,72 x 2,6 x 1,3")
Outer diameter of woofer            102 mm (4")
Cone material            Coated paper cone
Magnet size            80 mm (3,15")
Mounting depth            57 mm ( 2,25")
Mounting hole            97 mm (3,82")
T/S parameters
single V/C            
Fs             80             Hz              Re             3,3             Ohm              Qms             4,8            
Vas             1,4             liter              Vas             0,05             Cuft              Qes             0,68            
Qts             0,6                          Sd                          cm²              BL             5,4            
EAN Bar code            7331644821403



CK-RC4.2
4 inch 2-way Component System - separate X-Over 60 WRMS
Reference 4 inch 2-way Component System with Separate X-Over 60 WRMS

Reference series RC4.2 is a 10 cm (4) 2-way component kit with a separate 25 mm tweeter with copper rings for improved treble sound.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a coated paper cone with rubber edge and a 80 mm powerful magnet that guarantees a good bass control and a fantastic sound. Grilles are included.

Filter boxes with only the best components!

Specifications            

Woofer size            10 cm (4")
Tweeter            RC25, 25 mm (1,25") silk dome tweeter with copper rings
Power handling capacity            60 W RMS / 100 W max / 200 W peak power
Impedance            4 ohm
Frequency range            65 - 22 000 Hz
Sensitivity            86 dB (1W/1m)
Crossover            Filter box with 12 dB slope (HP & LP)
Crossover point (Hz)            4500 Hz
Size of filter box            120 x 66 x 33 mm ( 4,72 x 2,6 x 1,3")
Outer diameter of woofer            102 mm (4")
Cone material            Coated paper cone
Magnet size            80 mm (3,15")
Mounting depth            57 mm ( 2,25")
Mounting hole            97 mm (3,82")
T/S parameters
single V/C            
Fs             80             Hz              Re             3,3             Ohm              Qms             4,8            
Vas             1,4             liter              Vas             0,05             Cuft              Qes             0,68            
Qts             0,6                          Sd                          cm²              BL             5,4            
EAN Bar code            7331644821403



CK-RC4.2
4 inch 2-way Component System - separate X-Over 60 WRMS
Performance 4 inch  2-way Component System with Separate  X-Over 60 WRMS
            
Performance series MC4.2 is a 10 cm (4") 2-way component kit with a separate 20 mm tweeter with copper cups for improved treble sound.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a fibre glass cone with rubber edge and  an 80 mm powerful magnet that guarantees a good bass control.
Grilles are included.

Filter boxes with only the best components!

Specifications
            
Woofer size            10 cm (4")
Tweeter            RC25, 25 mm textile dome tweeter with copper rings
Power handling capacity            60 W RMS / 90 W max, 180 Watt peak power
Impedance            4 ohm
Frequency range            70 - 20.000 Hz
Crossover point (Hz)            4500 Hz
Sensitivity            83 dB (1W/1m)
Outer diameter of woofer            102 mm (4")
Cone material            Fibre glass with rubber edge
Magnet size            80 mm (3,15")
Mounting depth            54 mm ( 2,16")
Crossover            Filter box with HP12dB, LP 12 dB slope
Mounting hole            97 mm (3,82")
Size of filter box            125 x 95 x 34 mm
EAN Bar code            7331644822707

CK-MC4.2
4 inch 2-way Component System - separate X-Over 60 WRMS
Performance 4 inch  2-way Component System with Separate  X-Over 60 WRMS
            
Performance series MC4.2 is a 10 cm (4") 2-way component kit with a separate 20 mm tweeter with copper cups for improved treble sound.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a fibre glass cone with rubber edge and  an 80 mm powerful magnet that guarantees a good bass control.
Grilles are included.

Filter boxes with only the best components!

Specifications
            
Woofer size            10 cm (4")
Tweeter            RC25, 25 mm textile dome tweeter with copper rings
Power handling capacity            60 W RMS / 90 W max, 180 Watt peak power
Impedance            4 ohm
Frequency range            70 - 20.000 Hz
Crossover point (Hz)            4500 Hz
Sensitivity            83 dB (1W/1m)
Outer diameter of woofer            102 mm (4")
Cone material            Fibre glass with rubber edge
Magnet size            80 mm (3,15")
Mounting depth            54 mm ( 2,16")
Crossover            Filter box with HP12dB, LP 12 dB slope
Mounting hole            97 mm (3,82")
Size of filter box            125 x 95 x 34 mm
EAN Bar code            7331644822707

CK-MC4.2
4 inch 2-way Component System - separate X-Over 60 WRMS
Ultimate 4" 2-way Component System with Separate X-Over 80 WRMS

Ultimate series UPi4 is a 10 cm (4") 2-way component with Kevlar cone.
Fits most cars designed for 4" speakers.
Can be installed in new BMW cars, adapter is included.
The tweeter fits directly in the A-pillar tweeter attachment for BMW.
A separate 200 Hz High pass filter can be connected when used in BMW cars with subwoofer.

Neodymium magnet system.
Small installation depth
Powerful neodymium magnet system.
Filter boxes with selectable tweeter level in two steps.
25 mm silk dome tweeter RC25
Grilles are included.

Specifications
            
Woofer size            10 cm (4")
Tweeter            RC25 - 25 mm silk dome tweeter
Power handling capacity            80 W RMS / 160 W max
Impedance            4 ohm
Frequency range            65 - 22 000 Hz
Sensitivity            89 dB /(1W/1m)
Crossover            Box filter with separate HP-filter 200 Hz
Crossover point (Hz)            5000 Hz
Size of filter box            124 x 94 x 33 mm ( 5,71 x 3,34 x 1,77")
Outer diameter of woofer            100 mm (4")
Magnet size            35 x 15 mm (1,38 x 0,59") neodymium
Mounting depth            45 mm (1,77"), tweeter 20 mm (0,78")
Mounting hole            100 mm (4"), tweeter 46 mm (1,8")
EAN Bar code            7331644824206


CK-UPi4
4" 2-way Component System - separate X-Over 80 WRMS
Ultimate 4" 2-way Component System with Separate X-Over 80 WRMS

Ultimate series UPi4 is a 10 cm (4") 2-way component with Kevlar cone.
Fits most cars designed for 4" speakers.
Can be installed in new BMW cars, adapter is included.
The tweeter fits directly in the A-pillar tweeter attachment for BMW.
A separate 200 Hz High pass filter can be connected when used in BMW cars with subwoofer.

Neodymium magnet system.
Small installation depth
Powerful neodymium magnet system.
Filter boxes with selectable tweeter level in two steps.
25 mm silk dome tweeter RC25
Grilles are included.

Specifications
            
Woofer size            10 cm (4")
Tweeter            RC25 - 25 mm silk dome tweeter
Power handling capacity            80 W RMS / 160 W max
Impedance            4 ohm
Frequency range            65 - 22 000 Hz
Sensitivity            89 dB /(1W/1m)
Crossover            Box filter with separate HP-filter 200 Hz
Crossover point (Hz)            5000 Hz
Size of filter box            124 x 94 x 33 mm ( 5,71 x 3,34 x 1,77")
Outer diameter of woofer            100 mm (4")
Magnet size            35 x 15 mm (1,38 x 0,59") neodymium
Mounting depth            45 mm (1,77"), tweeter 20 mm (0,78")
Mounting hole            100 mm (4"), tweeter 46 mm (1,8")
EAN Bar code            7331644824206


CK-UPi4
4" 2-way Component System - separate X-Over 80 WRMS
Reference 5 inch 2-way Component System with Separate X-Over 50 WRMS

Reference series RCS5.2 is a 13 cm (5,25") 2-way component with good sound qualitys. The cone is made of wowen fibre glass with a rubber surround.

A small installation depth (43 mm)makes them fit most vehicles.
Filter boxes with selectable tweeter level.
25 mm silk dome tweeter with copper rings.
Grilles are included.

Specifications            

Woofer size            13 cm (5,25")
Tweeter            RC25, 25 mm (1") silk dome tweeter with copper rings
Power handling capacity            50 W RMS / 90 W max / 180 W peak power
Impedance            4 ohm
Frequency range            70 - 22.000 Hz
Sensitivity            86 dB (1W/1m)
Outer diameter of woofer            130 mm (5,25")
Cone material            Wowen fibre glass
Magnet size            70 mm (3,15"), hybrid FE / Nd
Crossover            Box filter with 12/12 dB slope (LP/HP)
Crossover point (Hz)            5500 Hz
Size of filter box            125 x 95 x 34 mm
Mounting depth            43 mm ( 1,7")
Mounting hole            123 mm (4,84")
T/S parameters
single V/C            
Fs                          Hz              Re                          Ohm              Qms                         
Vas                          liter              Vas                          Cuft              Qes                         
Qts                                       Sd                          cm²              BL                         
EAN Bar code            7331644821502

CK-RCS5.2
5 inch 2-way Component System - separate X-Over 50 WRMS
Reference 5 inch 2-way Component System with Separate X-Over 50 WRMS

Reference series RCS5.2 is a 13 cm (5,25") 2-way component with good sound qualitys. The cone is made of wowen fibre glass with a rubber surround.

A small installation depth (43 mm)makes them fit most vehicles.
Filter boxes with selectable tweeter level.
25 mm silk dome tweeter with copper rings.
Grilles are included.

Specifications            

Woofer size            13 cm (5,25")
Tweeter            RC25, 25 mm (1") silk dome tweeter with copper rings
Power handling capacity            50 W RMS / 90 W max / 180 W peak power
Impedance            4 ohm
Frequency range            70 - 22.000 Hz
Sensitivity            86 dB (1W/1m)
Outer diameter of woofer            130 mm (5,25")
Cone material            Wowen fibre glass
Magnet size            70 mm (3,15"), hybrid FE / Nd
Crossover            Box filter with 12/12 dB slope (LP/HP)
Crossover point (Hz)            5500 Hz
Size of filter box            125 x 95 x 34 mm
Mounting depth            43 mm ( 1,7")
Mounting hole            123 mm (4,84")
T/S parameters
single V/C            
Fs                          Hz              Re                          Ohm              Qms                         
Vas                          liter              Vas                          Cuft              Qes                         
Qts                                       Sd                          cm²              BL                         
EAN Bar code            7331644821502

CK-RCS5.2
5 inch 2-way Component System - separate X-Over 50 WRMS
Reference 6.5 inch 2-way Component System with Separate X-Over 100 WRMS

Reference series RC6.2 is a 16,5cm (6,5) 2-way component kit with a separate 28 mm tweeter with copper rings for improved treble sound.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a cone of black anodized aluminium with dual rubber edge and a 110 mm powerful magnet that guarantees a good bass control. Grilles are included.

Filter boxes with only the best components!

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            RC28, 28 mm (1,25") silk dome tweeter with copper rings
Power handling capacity            100 W RMS / 150 W max / 300 W peak power
Impedance            4 ohm
Frequency range            50 - 25 000 Hz
Sensitivity            90 dB (1W/1m)
Crossover            Filter box with 6/12 dB slope (LP/HP)
Crossover point (Hz)            4500 Hz
Size of filter box            145 x 85 x 45 mm ( 5,71 x 3,35 x 1,77")
Outer diameter of woofer            165 mm (6,5")
Cone material            Black anodized aluminium cone
Magnet size            110 mm (4,33")
Mounting depth            75 mm ( 3")
Mounting hole            145 mm (5,7")
T/S parameters
single V/C            
Fs             58,7             Hz              Re             2,3             Ohm              Qms             3,5            
Vas             9,65             liter              Vas             0,34             Cuft              Qes             0,76            
Qts             0,62                          Sd             147             cm²              BL             5,06            
EAN Bar code            7331644821205



CK-RC6.2
6.5" 2-way Component System - separate X-Over 100 WRMS
Reference 6.5 inch 2-way Component System with Separate X-Over 100 WRMS

Reference series RC6.2 is a 16,5cm (6,5) 2-way component kit with a separate 28 mm tweeter with copper rings for improved treble sound.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a cone of black anodized aluminium with dual rubber edge and a 110 mm powerful magnet that guarantees a good bass control. Grilles are included.

Filter boxes with only the best components!

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            RC28, 28 mm (1,25") silk dome tweeter with copper rings
Power handling capacity            100 W RMS / 150 W max / 300 W peak power
Impedance            4 ohm
Frequency range            50 - 25 000 Hz
Sensitivity            90 dB (1W/1m)
Crossover            Filter box with 6/12 dB slope (LP/HP)
Crossover point (Hz)            4500 Hz
Size of filter box            145 x 85 x 45 mm ( 5,71 x 3,35 x 1,77")
Outer diameter of woofer            165 mm (6,5")
Cone material            Black anodized aluminium cone
Magnet size            110 mm (4,33")
Mounting depth            75 mm ( 3")
Mounting hole            145 mm (5,7")
T/S parameters
single V/C            
Fs             58,7             Hz              Re             2,3             Ohm              Qms             3,5            
Vas             9,65             liter              Vas             0,34             Cuft              Qes             0,76            
Qts             0,62                          Sd             147             cm²              BL             5,06            
EAN Bar code            7331644821205



CK-RC6.2
6.5" 2-way Component System - separate X-Over 100 WRMS
Performance 6.5inch 2-way Component System with Separate X-Over 80 WRMS

            
Performance series MB6.2 is a 16,5cm (6,5") 2-way component kit with a separate 25 mm tweeter.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.
A great sounding kit for a good price.

The bass driver has a fibre glass cone and the 90 mm powerful magnet guarantees a good bass control.
Grilles are included.

Small filter boxes

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            25 mm soft dome tweeter, M25
Power handling capacity            80 W RMS / 100 W max, 200 Watt peak power
Impedance            4 ohm
Frequency range            50 - 20.000 Hz
Crossover point (Hz)            5500 Hz
Sensitivity            87 dB (1W/1m)
Outer diameter of woofer            165 mm (6,5")
Magnet size            90 mm (3,54")
Cone material            Fibre glass
Mounting depth            65mm ( 2,56")
Crossover            Separate filter box
Mounting hole            145 mm (5,75")
Size of filter box            120 x 65 x 33 mm
EAN Bar code            7331644820604

CK-MB6.2
6.5inch 2-way Component System - separate X-Over 80 WRM
Performance 6.5inch 2-way Component System with Separate X-Over 80 WRMS

            
Performance series MB6.2 is a 16,5cm (6,5") 2-way component kit with a separate 25 mm tweeter.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.
A great sounding kit for a good price.

The bass driver has a fibre glass cone and the 90 mm powerful magnet guarantees a good bass control.
Grilles are included.

Small filter boxes

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            25 mm soft dome tweeter, M25
Power handling capacity            80 W RMS / 100 W max, 200 Watt peak power
Impedance            4 ohm
Frequency range            50 - 20.000 Hz
Crossover point (Hz)            5500 Hz
Sensitivity            87 dB (1W/1m)
Outer diameter of woofer            165 mm (6,5")
Magnet size            90 mm (3,54")
Cone material            Fibre glass
Mounting depth            65mm ( 2,56")
Crossover            Separate filter box
Mounting hole            145 mm (5,75")
Size of filter box            120 x 65 x 33 mm
EAN Bar code            7331644820604

CK-MB6.2
6.5inch 2-way Component System - separate X-Over 80 WRM
Performance 6.5inch 2-way Component System with Separate X-Over 60 WRMS

Performance series M6.2 is a 16,5cm (6,5") 2-way component kit with a separate 25 mm tweeter.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a cone of paper reinforced with textile fibres, a 90 mm powerful magnet guarantees a good bass control.
Grilles are included.

Small filter boxes to the tweeters.
Good value for money!

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            25 mm soft dome tweeter
Power handling capacity            60 W RMS / 80 W max, 160 Watt peak power
Impedance            4 ohm
Frequency range            55 - 25.000 Hz
Crossover point (Hz)            5500 Hz
Sensitivity            87 dB (1W/1m)
Outer diameter of woofer            165 mm (6,5")
Magnet size            90 mm (3,54")
Cone material            Paper cone with textile fibres
Mounting depth            65mm ( 2,56")
Crossover            12dB slope filterbox to the tweeter, two tweeter levels
Mounting hole            145 mm (5,75")
Size of filter box            73 x 36 x 35 mm
EAN Bar code            7331644820505

CK-M6.2
6.5inch 2-way Component System - separate X-Over 60 WRM
Performance 6.5inch 2-way Component System with Separate X-Over 60 WRMS

Performance series M6.2 is a 16,5cm (6,5") 2-way component kit with a separate 25 mm tweeter.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a cone of paper reinforced with textile fibres, a 90 mm powerful magnet guarantees a good bass control.
Grilles are included.

Small filter boxes to the tweeters.
Good value for money!

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            25 mm soft dome tweeter
Power handling capacity            60 W RMS / 80 W max, 160 Watt peak power
Impedance            4 ohm
Frequency range            55 - 25.000 Hz
Crossover point (Hz)            5500 Hz
Sensitivity            87 dB (1W/1m)
Outer diameter of woofer            165 mm (6,5")
Magnet size            90 mm (3,54")
Cone material            Paper cone with textile fibres
Mounting depth            65mm ( 2,56")
Crossover            12dB slope filterbox to the tweeter, two tweeter levels
Mounting hole            145 mm (5,75")
Size of filter box            73 x 36 x 35 mm
EAN Bar code            7331644820505

CK-M6.2
6.5inch 2-way Component System - separate X-Over 60 WRM
Stereo jack (f) 3,5 mm > RCA connector (m)

Length: 20 cm

CK-M6.2i
Stereo jack (f) 3,5 mm > RCA connector (m)
Stereo jack (f) 3,5 mm > RCA connector (m)

Length: 20 cm

CK-M6.2i
Stereo jack (f) 3,5 mm > RCA connector (m)
Performance 6.5inch 2-way Component System with separate X-Over 80 WRMS
            
Performance series MC6.2 is a 16,5cm (6,5") 2-way component kit with a separate 25 mm tweeter with copper cups for improved treble sound.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a fibre glass cone with rubber edge and  a 100 mm powerful magnet that guarantees a good bass control.
Grilles are included.

Filter boxes with only the best components!

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            RC25, 25 mm textile dome tweeter with copper rings
Power handling capacity            80 W RMS / 100 W max, 200 Watt peak power
Impedance            4 ohm
Frequency range            50 - 25.000 Hz
Crossover point (Hz)            4500 Hz
Sensitivity            87 dB (1W/1m)
Outer diameter of woofer            165 mm (6,5")
Cone material            Fibre glass with rubber edge
Magnet size            100 mm (4")
Mounting depth            67mm ( 2,64")
Crossover            Filter box with HP12dB, LP 12 dB slope
Mounting hole            145 mm (5,75")
Size of filter box            125 x 95 x 34 mm
EAN Bar code            7331644821106

CK-MC6.2
6.5inch 2-way Component System - separate X-Over 80 WRMS
Performance 6.5inch 2-way Component System with separate X-Over 80 WRMS
            
Performance series MC6.2 is a 16,5cm (6,5") 2-way component kit with a separate 25 mm tweeter with copper cups for improved treble sound.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a fibre glass cone with rubber edge and  a 100 mm powerful magnet that guarantees a good bass control.
Grilles are included.

Filter boxes with only the best components!

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            RC25, 25 mm textile dome tweeter with copper rings
Power handling capacity            80 W RMS / 100 W max, 200 Watt peak power
Impedance            4 ohm
Frequency range            50 - 25.000 Hz
Crossover point (Hz)            4500 Hz
Sensitivity            87 dB (1W/1m)
Outer diameter of woofer            165 mm (6,5")
Cone material            Fibre glass with rubber edge
Magnet size            100 mm (4")
Mounting depth            67mm ( 2,64")
Crossover            Filter box with HP12dB, LP 12 dB slope
Mounting hole            145 mm (5,75")
Size of filter box            125 x 95 x 34 mm
EAN Bar code            7331644821106

CK-MC6.2
6.5inch 2-way Component System - separate X-Over 80 WRMS
Reference 6.5 inch 2-way Component System with Separate X-Over 50 WRMS

Reference series RCS6.2 is a 16,5 cm (6,5") 2-way component. The cone is made of wowen glass fibre with rubber surround giving this speaker set a good sound.

A small installation depth (45 mm)makes them fit most vehicles.
Filter boxes with selectable tweeter level.
25 mm silk dome tweeter with copper rings.
Grilles are included.

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            RC25, 25 mm (1") silk dome tweeter with copper rings
Power handling capacity            50 W RMS / 90 W max / 180 W peak power
Impedance            4 ohm
Frequency range            55 - 22.000 Hz
Sensitivity            86 dB (1W/1m)
Outer diameter of woofer            165 mm (6,5")
Cone material            Wowen glass fibres
Magnet size            80 mm (3,15"), hybrid FE / Nd
Crossover            Box filter with 6/12 dB slope (LP/HP)
Crossover point (Hz)            5500 Hz
Size of filter box            125 x 95 x 34 mm
Mounting depth            45 mm ( 1,77")
Mounting hole            146 mm (5,75")
T/S parameters
single V/C            
Fs                          Hz              Re                          Ohm              Qms                         
Vas                          liter              Vas                          Cuft              Qes                         
Qts                                       Sd                          cm²              BL                         
EAN Bar code            7331644821601



CK-RCS6.2
6.5 inch 2-way Component System - separate X-Over 50 WRMS
Reference 6.5 inch 2-way Component System with Separate X-Over 50 WRMS

Reference series RCS6.2 is a 16,5 cm (6,5") 2-way component. The cone is made of wowen glass fibre with rubber surround giving this speaker set a good sound.

A small installation depth (45 mm)makes them fit most vehicles.
Filter boxes with selectable tweeter level.
25 mm silk dome tweeter with copper rings.
Grilles are included.

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            RC25, 25 mm (1") silk dome tweeter with copper rings
Power handling capacity            50 W RMS / 90 W max / 180 W peak power
Impedance            4 ohm
Frequency range            55 - 22.000 Hz
Sensitivity            86 dB (1W/1m)
Outer diameter of woofer            165 mm (6,5")
Cone material            Wowen glass fibres
Magnet size            80 mm (3,15"), hybrid FE / Nd
Crossover            Box filter with 6/12 dB slope (LP/HP)
Crossover point (Hz)            5500 Hz
Size of filter box            125 x 95 x 34 mm
Mounting depth            45 mm ( 1,77")
Mounting hole            146 mm (5,75")
T/S parameters
single V/C            
Fs                          Hz              Re                          Ohm              Qms                         
Vas                          liter              Vas                          Cuft              Qes                         
Qts                                       Sd                          cm²              BL                         
EAN Bar code            7331644821601



CK-RCS6.2
6.5 inch 2-way Component System - separate X-Over 50 WRMS
Performance 6.5inch 2-way Component System with Separate X-Over 55 WRMS
            
Performance series MK6.2 is a 16,5cm (6,5") 2-way component kit with a separate 16 mm mylar tweeter.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a cone of paper reinforced with textile fibres. Together with a powerful magnet system it guarantees a good bass control.
Grilles are included.
Small filter boxes to the tweeters
Good value for money!

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            16 mm mylar
Power handling capacity            55 W RMS / 70 W max, 140 Watt peak power
Impedance            4 ohm
Frequency range            55 - 20.000 Hz
Crossover point (Hz)            6000 Hz
Sensitivity            89 dB (1W/1m)
Outer diameter of woofer            165 mm (6,5")
Cone material            Paper cone with textile fibres
Magnet size            90 mm (3,54")
Mounting depth            65mm ( 2,56")
Crossover            A small 12 dB filter box to the tweeter
Mounting hole            145 mm (5,75")
Size of filter box            73 x 36 x 35 mm
EAN Bar code            7331644820406


CK-MK6.2
6.5inch 2-way Component System - separate X-Over 55 WRM
Performance 6.5inch 2-way Component System with Separate X-Over 55 WRMS
            
Performance series MK6.2 is a 16,5cm (6,5") 2-way component kit with a separate 16 mm mylar tweeter.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a cone of paper reinforced with textile fibres. Together with a powerful magnet system it guarantees a good bass control.
Grilles are included.
Small filter boxes to the tweeters
Good value for money!

Specifications            

Woofer size            16,5 cm (6,5")
Tweeter            16 mm mylar
Power handling capacity            55 W RMS / 70 W max, 140 Watt peak power
Impedance            4 ohm
Frequency range            55 - 20.000 Hz
Crossover point (Hz)            6000 Hz
Sensitivity            89 dB (1W/1m)
Outer diameter of woofer            165 mm (6,5")
Cone material            Paper cone with textile fibres
Magnet size            90 mm (3,54")
Mounting depth            65mm ( 2,56")
Crossover            A small 12 dB filter box to the tweeter
Mounting hole            145 mm (5,75")
Size of filter box            73 x 36 x 35 mm
EAN Bar code            7331644820406


CK-MK6.2
6.5inch 2-way Component System - separate X-Over 55 WRM
Ultimate 6.5" 2-way Component System with Separate X-Over 120 WRMS

UPI6


Ultimate series UPi6 is a 16,5 cm (6,5") 2-way component with aluminium cone, a part of our Ultimate Hi-End series.
Powerful neodymium magnet system.
Two inch voice coil.
Filterboxes with selectable tweeter level in two steps.
28 mm silk dome tweeter RC28
Grilles are included.

Specifications
            
Outer diameter of woofer            165 mm (6,5")
Tweeter            RC28, 28 mm silk dome tweeter
Power handling capacity            120 W RMS / 200 W max / 300 W peak power
Impedance            4 ohm
Frequency range            50 - 25 000 Hz
Sensitivity            84,2 dB (1W/1m)
Crossover            Box filter with slope LP: 6 dB, HP: 12 dB
Crossover point (Hz)            5000 Hz
Size of filter box            145 x 95 x 45 mm ( 5,71 x 3,74 x 1,77")
Woofer size            16,5 cm (6,5")
Magnet size            58 mm (2,28") neodymium
Mounting depth            60 mm (2,36")
Mounting hole            145 mm (5,7")
EAN Bar code            7331644824305

CK-UPi6
6.5" 2-way Component System - separate X-Over120 WRMS
Ultimate 6.5" 2-way Component System with Separate X-Over 120 WRMS

UPI6


Ultimate series UPi6 is a 16,5 cm (6,5") 2-way component with aluminium cone, a part of our Ultimate Hi-End series.
Powerful neodymium magnet system.
Two inch voice coil.
Filterboxes with selectable tweeter level in two steps.
28 mm silk dome tweeter RC28
Grilles are included.

Specifications
            
Outer diameter of woofer            165 mm (6,5")
Tweeter            RC28, 28 mm silk dome tweeter
Power handling capacity            120 W RMS / 200 W max / 300 W peak power
Impedance            4 ohm
Frequency range            50 - 25 000 Hz
Sensitivity            84,2 dB (1W/1m)
Crossover            Box filter with slope LP: 6 dB, HP: 12 dB
Crossover point (Hz)            5000 Hz
Size of filter box            145 x 95 x 45 mm ( 5,71 x 3,74 x 1,77")
Woofer size            16,5 cm (6,5")
Magnet size            58 mm (2,28") neodymium
Mounting depth            60 mm (2,36")
Mounting hole            145 mm (5,7")
EAN Bar code            7331644824305

CK-UPi6
6.5" 2-way Component System - separate X-Over120 WRMS
Ultimate 6.5 inch 3-way Component System with Separate X-Over 120 WRMS

Ultimate series UPi36 is a 16,5 cm (6,5") 3-way component with very good sound. This kit is the replacement for UP36i.
The midrange is our unique UPi2,5C (2,5", 63 mm) mid-dome with chamber.
Powerful neodymium magnet system.
Two inch voice coil.
Filterboxes with selectable tweeter level.
25 mm silk dome tweeter RC25
Grilles are included.

Specifications            

Woofer size            16,5 cm (6,5")
Midrange size            63 mm (2,5")
Tweeter            RC25, 25 mm (1,1") silk dome tweeter
Power handling capacity            120 W RMS / 200 W max
Impedance            4 ohm
Frequency range            50 - 20.000 Hz
Sensitivity            84,2 dB (1W/1m)
Crossover            Filter box with 12/6/6/12 dB slope
Crossover point (Hz)            500 Hz / 5000 Hz
Size of filter box            145 x 95 x 38 mm ( 5,71 x 3,74 x 1,5")
Outer diameter of woofer            Woofer: 165 mm (6,5") Mid: 100 mm (3,94")
Magnet size            58 mm (2,28") neodymium
Mounting depth            Woofer: 60 mm ( 2,36") Mid: 29 mm (1,14")
Mounting hole            Woofer: 145 mm (5,7") Mid: 80 mm (3,15")
EAN Bar code            7331644824503

CK-UPi36
6.5" 3-way Component System - separate X-Over 120 WRMS
Ultimate 6.5 inch 3-way Component System with Separate X-Over 120 WRMS

Ultimate series UPi36 is a 16,5 cm (6,5") 3-way component with very good sound. This kit is the replacement for UP36i.
The midrange is our unique UPi2,5C (2,5", 63 mm) mid-dome with chamber.
Powerful neodymium magnet system.
Two inch voice coil.
Filterboxes with selectable tweeter level.
25 mm silk dome tweeter RC25
Grilles are included.

Specifications            

Woofer size            16,5 cm (6,5")
Midrange size            63 mm (2,5")
Tweeter            RC25, 25 mm (1,1") silk dome tweeter
Power handling capacity            120 W RMS / 200 W max
Impedance            4 ohm
Frequency range            50 - 20.000 Hz
Sensitivity            84,2 dB (1W/1m)
Crossover            Filter box with 12/6/6/12 dB slope
Crossover point (Hz)            500 Hz / 5000 Hz
Size of filter box            145 x 95 x 38 mm ( 5,71 x 3,74 x 1,5")
Outer diameter of woofer            Woofer: 165 mm (6,5") Mid: 100 mm (3,94")
Magnet size            58 mm (2,28") neodymium
Mounting depth            Woofer: 60 mm ( 2,36") Mid: 29 mm (1,14")
Mounting hole            Woofer: 145 mm (5,7") Mid: 80 mm (3,15")
EAN Bar code            7331644824503

CK-UPi36
6.5" 3-way Component System - separate X-Over 120 WRMS
Anniversary 6.5 inch 3-way Component System with Seperate X-Over 100 WRMS

Reference series RC6.3 is a 16,5cm (6,5) 3-way component kit with a separate 2,5 dome midrange and a 25 mm tweeter with copper rings for improved treble sound.
Install the midrange and tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a cone of pressed paper with dual rubber edge and a 100 mm powerful magnet that guarantees a good bass control. Grilles are included.

Filter boxes with only the best components!

Specifications
            
Impedance            4 ohm
Power handling capacity            100 W RMS / 150 W max
Woofer size            16,5 cm (6,5")
Midrange size            63 mm (2,5") UPi2,5
Tweeter            RC25, 25 mm (1") silk dome tweeter
Frequency range            40 - 22 000 Hz
Sensitivity            85 dB (1W/1m)
Crossover point (Hz)            550 Hz / 4000 Hz
Outer diameter of woofer            Woofer: 165 mm (6,5"). Mid: 114 mm (4,49")
Magnet size            Woofer: 100 mm (4"). Mid: 60 mm (2,36")
Mounting depth            Woofer: 68 mm ( 2,3"). Mid: 14 mm (0,55")
Mounting hole            Woofer: 145 mm (5,7"). Mid: 80 mm (3,15")
Size of filter box            145 x 95 x 45 mm ( 5,71 x 3,74 x 1,77")
T/S parameters
single V/C            
Fs             64,2             Hz              Re             3,4             Ohm              Qms             7,29            
Vas             6,27             liter              Vas             0,22             Cuft              Qes             0,884            
Qts             0,79                          Sd                          cm²              BL             6,59            
Crossover            Crossover boxes with 12/6/6 db slope
EAN Bar code            7331644821700


CK-RC6.3Q-40
Anniversary 6.5 inch 2-way Component System 100WRMS
Anniversary 6.5 inch 3-way Component System with Seperate X-Over 100 WRMS

Reference series RC6.3 is a 16,5cm (6,5) 3-way component kit with a separate 2,5 dome midrange and a 25 mm tweeter with copper rings for improved treble sound.
Install the midrange and tweeter on the dashboard or recessed in the door, all mounting parts are included.

The bass driver has a cone of pressed paper with dual rubber edge and a 100 mm powerful magnet that guarantees a good bass control. Grilles are included.

Filter boxes with only the best components!

Specifications
            
Impedance            4 ohm
Power handling capacity            100 W RMS / 150 W max
Woofer size            16,5 cm (6,5")
Midrange size            63 mm (2,5") UPi2,5
Tweeter            RC25, 25 mm (1") silk dome tweeter
Frequency range            40 - 22 000 Hz
Sensitivity            85 dB (1W/1m)
Crossover point (Hz)            550 Hz / 4000 Hz
Outer diameter of woofer            Woofer: 165 mm (6,5"). Mid: 114 mm (4,49")
Magnet size            Woofer: 100 mm (4"). Mid: 60 mm (2,36")
Mounting depth            Woofer: 68 mm ( 2,3"). Mid: 14 mm (0,55")
Mounting hole            Woofer: 145 mm (5,7"). Mid: 80 mm (3,15")
Size of filter box            145 x 95 x 45 mm ( 5,71 x 3,74 x 1,77")
T/S parameters
single V/C            
Fs             64,2             Hz              Re             3,4             Ohm              Qms             7,29            
Vas             6,27             liter              Vas             0,22             Cuft              Qes             0,884            
Qts             0,79                          Sd                          cm²              BL             6,59            
Crossover            Crossover boxes with 12/6/6 db slope
EAN Bar code            7331644821700


CK-RC6.3Q-40
Anniversary 6.5 inch 2-way Component System 100WRMS
Insulation
Alu Butyl 3 layer "Heavy Duty" insulation material

460 x 800 x 6 mm
Butyl (black) + rigid foam interlayer ca. 3mm + Butyl (black) + aluminium toplayer
for vibration insulation of metal and cladding parts
Content: 5 pieces

30.1232-60-5
Alu Butyl 3 layer "Heavy Duty" insulation material 5 pieces
Alu Butyl 3 layer "Heavy Duty" insulation material

460 x 800 x 6 mm
Butyl (black) + rigid foam interlayer ca. 3mm + Butyl (black) + aluminium toplayer
for vibration insulation of metal and cladding parts
Content: 5 pieces

30.1232-60-5
Alu Butyl 3 layer "Heavy Duty" insulation material 5 pieces
Aluminium Butyl insulation material

460 x 800 x 1,8mm
Aluminium top layer
Butyl (black) for vibration dampening of metal and cladding parts
Content: 10 pieces

30.1232-18-10
Aluminium Butyl insulation material 460x800x1.8 mm 10 pieces
Aluminium Butyl insulation material

460 x 800 x 1,8mm
Aluminium top layer
Butyl (black) for vibration dampening of metal and cladding parts
Content: 10 pieces

30.1232-18-10
Aluminium Butyl insulation material 460x800x1.8 mm 10 pieces
Aluminium Butyl insulation material

460 x 800 x 1,8mm
Aluminium top layer
Butyl (black) for vibration dampening of metal and cladding parts
Content: 5 pieces

30.1232-18-5
Aluminium Butyl insulation material 460x800x1.8 mm 5 pieces
Aluminium Butyl insulation material

460 x 800 x 1,8mm
Aluminium top layer
Butyl (black) for vibration dampening of metal and cladding parts
Content: 5 pieces

30.1232-18-5
Aluminium Butyl insulation material 460x800x1.8 mm 5 pieces
Aluminium Butyl insulation material

460 x 800 x 2,1mm
Aluminium top layer
Butyl (black) for vibration dampening of metal and cladding parts
Content: 10 pieces

30.1232-21-10
Aluminium Butyl insulation material 460x800x2.1 mm 10 pieces
Aluminium Butyl insulation material

460 x 800 x 2,1mm
Aluminium top layer
Butyl (black) for vibration dampening of metal and cladding parts
Content: 10 pieces

30.1232-21-10
Aluminium Butyl insulation material 460x800x2.1 mm 10 pieces
Aluminium Butyl insulation material

460 x 800 x 2,1mm
Aluminium top layer
Butyl (black) for vibration dampening of metal and cladding parts
Content: 5 pieces

30.1232-21-5
Aluminium Butyl insulation material 460x800x2.1 mm 5 pieces
Aluminium Butyl insulation material

460 x 800 x 2,1mm
Aluminium top layer
Butyl (black) for vibration dampening of metal and cladding parts
Content: 5 pieces

30.1232-21-5
Aluminium Butyl insulation material 460x800x2.1 mm 5 pieces
pressure roller for insulaion material 32mm

width 32mm

30.1238-32
pressure roller for insulaion material 32mm
pressure roller for insulaion material 32mm

width 32mm

30.1238-32
pressure roller for insulaion material 32mm
pressure roller for insulaion material 32mm

width 32mm

30.1238-32-0
pressure roller for insulaion material 32mm bulk
pressure roller for insulaion material 32mm

width 32mm

30.1238-32-0
pressure roller for insulaion material 32mm bulk
pressure roller for insulation material 55mm

width 55mm

30.1238-55
pressure roller for insulation material 55mm
pressure roller for insulation material 55mm

width 55mm

30.1238-55
pressure roller for insulation material 55mm
pressure roller for insulation material

width 55mm

30.1238-55-0
pressure roller for insulation material 55mm bulk
pressure roller for insulation material

width 55mm

30.1238-55-0
pressure roller for insulation material 55mm bulk
butyl cord


length: 4.5 m

water resistant and hardly flammable

30.1236-01-0
butyl cord bulk
butyl cord


length: 4.5 m

water resistant and hardly flammable

30.1236-01-0
butyl cord bulk
Doorkit "Professional"

consisting of:

2 mats 30.1232-21
2 mats 30.1232-45
1 mat 30.1234-01
1 set 30.1237-01


30.1240-02
Door kit "Professional"
Doorkit "Professional"

consisting of:

2 mats 30.1232-21
2 mats 30.1232-45
1 mat 30.1234-01
1 set 30.1237-01


30.1240-02
Door kit "Professional"
Doorkit „Standard

consisting of 2 mats 30.1232-45 + 1 Matte 30.1234-01


30.1240-01
Door kit „Standard“
Doorkit „Standard

consisting of 2 mats 30.1232-45 + 1 Matte 30.1234-01


30.1240-01
Door kit „Standard“
Multilayer  insulation material

460 x 800 x 4,5 mm
Butyl (black)
Aluminium interlayer
3mm neoprene top layer for vibration insulation of metal and cladding parts
Content: 20 pieces

30.1232-45-20
Multilayer insulatioon materiall 460 x 800 x 4.5mm 20 pieces
Multilayer  insulation material

460 x 800 x 4,5 mm
Butyl (black)
Aluminium interlayer
3mm neoprene top layer for vibration insulation of metal and cladding parts
Content: 20 pieces

30.1232-45-20
Multilayer insulatioon materiall 460 x 800 x 4.5mm 20 pieces
Multilayer  insulation material

460 x 800 x 4,5 mm
Butyl (black)
Aluminium interlayer
3mm neoprene top layer for vibration insulation of metal and cladding parts
Content: 10 pieces

30.1232-45-10
Multilayer insulatioon material, 460 x 800 x 4.5mm 10 pieces
Multilayer  insulation material

460 x 800 x 4,5 mm
Butyl (black)
Aluminium interlayer
3mm neoprene top layer for vibration insulation of metal and cladding parts
Content: 10 pieces

30.1232-45-10
Multilayer insulatioon material, 460 x 800 x 4.5mm 10 pieces
Multilayer  insulation material

460 x 800 x 4,5 mm
Butyl (black)
Aluminium interlayer
3mm neoprene top layer for vibration insulation of metal and cladding parts
Content: 5 pieces

30.1232-45-5
Multilayer insulatioon materiall, 460 x 800 x 4.5mm 5 pieces
Multilayer  insulation material

460 x 800 x 4,5 mm
Butyl (black)
Aluminium interlayer
3mm neoprene top layer for vibration insulation of metal and cladding parts
Content: 5 pieces

30.1232-45-5
Multilayer insulatioon materiall, 460 x 800 x 4.5mm 5 pieces
burl foam material

semi-closed-cell
adhesive
500 x 800 x 25 mm
water resistent
hardly inflammable
for soundproofing
Content: 20 pieces

30.1234-01-20
burl foam material 20 pieces
burl foam material

semi-closed-cell
adhesive
500 x 800 x 25 mm
water resistent
hardly inflammable
for soundproofing
Content: 20 pieces

30.1234-01-20
burl foam material 20 pieces
burl foam material

semi-closed-cell
adhesive
500 x 800 x 25 mm
water resistent
hardly inflammable
for soundproofing
Content: 5 pieces

30.1234-01-5
burl foam material 5 pieces
burl foam material

semi-closed-cell
adhesive
500 x 800 x 25 mm
water resistent
hardly inflammable
for soundproofing
Content: 5 pieces

30.1234-01-5
burl foam material 5 pieces
PP fibre mat

adhesive
500 x 800 x 13mm
for conact- and air sound insulation
Content: 10 pieces

30.1233-15-10
PP fibre mat 10 pieces
PP fibre mat

adhesive
500 x 800 x 13mm
for conact- and air sound insulation
Content: 10 pieces

30.1233-15-10
PP fibre mat 10 pieces
PP fibre mat

adhesive
500 x 800 x 13mm
for conact- and air sound insulation
Content: 20 pieces

30.1233-15-20
PP fibre mat 20 pieces
PP fibre mat

adhesive
500 x 800 x 13mm
for conact- and air sound insulation
Content: 20 pieces

30.1233-15-20
PP fibre mat 20 pieces
PP fibre mats

These self-adhesive, soft polyester fibre mats absorb airborne sound and reliably decouple any contact points between
any contact points between the panelling and sheet metal parts.
They are also well suited for damping midrange enclosures.

Note:

not to use in wet area

Usecase:

insulation of contact or airborne sound behind panelling parts

Item features:

500mm x 800mm x 13mm

selfadhensive
water-ressistant
flame retardant

content: 5 pieces


30.1233-15-5
PP fibre mat 5 pieces
PP fibre mats

These self-adhesive, soft polyester fibre mats absorb airborne sound and reliably decouple any contact points between
any contact points between the panelling and sheet metal parts.
They are also well suited for damping midrange enclosures.

Note:

not to use in wet area

Usecase:

insulation of contact or airborne sound behind panelling parts

Item features:

500mm x 800mm x 13mm

selfadhensive
water-ressistant
flame retardant

content: 5 pieces


30.1233-15-5
PP fibre mat 5 pieces
Foam material adhesive

6mm
open-pored
500 x 800 x 6mm
for contact- and air sound insulation
Content: 10 pieces

30.1233-05-10
foam material adhesive 6mm 10 pieces
Foam material adhesive

6mm
open-pored
500 x 800 x 6mm
for contact- and air sound insulation
Content: 10 pieces

30.1233-05-10
foam material adhesive 6mm 10 pieces
Foam material adhesive

6mm
open-pored
500 x 800 x 6mm
for contact- and air sound insulation
Content: 40 pieces

30.1233-05-40
foam material adhesive 6mm 40 pieces
Foam material adhesive

6mm
open-pored
500 x 800 x 6mm
for contact- and air sound insulation
Content: 40 pieces

30.1233-05-40
foam material adhesive 6mm 40 pieces
"Fastrings" foam rings

for 130mm / 5/5.5" speakers


30.1237-02
"Fastrings" foam rings for 130mm / 5/5.5" speakers
"Fastrings" foam rings

for 130mm / 5/5.5" speakers


30.1237-02
"Fastrings" foam rings for 130mm / 5/5.5" speakers
"Fastrings" foam rings

5x7/6x8" speakers

thickness 2" (50mm)


30.1237-05
"Fastrings" foam rings5x7/6x8" speakers
"Fastrings" foam rings

5x7/6x8" speakers

thickness 2" (50mm)


30.1237-05
"Fastrings" foam rings5x7/6x8" speakers
"Fastrings" foam rings

for 6 & 6.5" (165mm) speaker

thickness 2" (50mm)

30.1237-03
"Fastrings" foam ringsfor 6 & 6.5" (165mm) speaker
"Fastrings" foam rings

for 6 & 6.5" (165mm) speaker

thickness 2" (50mm)

30.1237-03
"Fastrings" foam ringsfor 6 & 6.5" (165mm) speaker
"Fastrings" foam rings

for 6x9" speakers

thickness: 2" (50mm)

30.1237-04
"Fastrings" foam rings for 6x9" speaker
"Fastrings" foam rings

for 6x9" speakers

thickness: 2" (50mm)

30.1237-04
"Fastrings" foam rings for 6x9" speaker
adhesive foam rings

D=195mm

h=25mm

very soft foam ring for sealing between speaker rings and door panel

for 165mm / 6.5" speakers

30.1237-01
foam rings adhesive for 165mm / 6.5" speakers
adhesive foam rings

D=195mm

h=25mm

very soft foam ring for sealing between speaker rings and door panel

for 165mm / 6.5" speakers

30.1237-01
foam rings adhesive for 165mm / 6.5" speakers
adhesive foam rings

D=195mm

h=25mm

very soft foam ring for sealing between speaker rings and door panel

for 165mm / 6.5" speakers

30.1237-01-0
foam rings adhesive for 165mm / 6.5" speakers
adhesive foam rings

D=195mm

h=25mm

very soft foam ring for sealing between speaker rings and door panel

for 165mm / 6.5" speakers

30.1237-01-0
foam rings adhesive for 165mm / 6.5" speakers
Adhesive insulating material for heat insulation

1300 x 1000 x 6mm
temperatur resistant up to +160°C
top layer aluminium
foam material
semi-closed-cell with a adhesive layer
for heat and soundproofing of hoods


30.1235-01
Adhesive insulating material for heat insulation
Adhesive insulating material for heat insulation

1300 x 1000 x 6mm
temperatur resistant up to +160°C
top layer aluminium
foam material
semi-closed-cell with a adhesive layer
for heat and soundproofing of hoods


30.1235-01
Adhesive insulating material for heat insulation
Loudspeakers
2-Way Marine Speaker 165 mm

10 oz Magnet
Impedance  : 8 Ohm
Max Power  : 100 Watt

speaker: 165 mm
panel cut out: 150.50 mm
outer diameter: 178,50 mm
ring height: 60.00 mm

278000-13
2-Way Marine Speaker 165 mm
2-Way Marine Speaker 165 mm

10 oz Magnet
Impedance  : 8 Ohm
Max Power  : 100 Watt

speaker: 165 mm
panel cut out: 150.50 mm
outer diameter: 178,50 mm
ring height: 60.00 mm

278000-13
2-Way Marine Speaker 165 mm
RS-A1073

Diameter - Ø 100 mm
Cone - Polypropylen
Tweeters - Mylar
Frequency Response - 105HZ ~ 20KHZ
Impedance - 4 Ohm
Sensitivity - 84dB
Rated Power (RMS) - 20W
Peak Power - 60W
Magnet Diameter - 65 mm
Mounting Depth - 44.5 mm




RS-A 1073
Loudspeaker set 100 mm RS-A 1073
RS-A1073

Diameter - Ø 100 mm
Cone - Polypropylen
Tweeters - Mylar
Frequency Response - 105HZ ~ 20KHZ
Impedance - 4 Ohm
Sensitivity - 84dB
Rated Power (RMS) - 20W
Peak Power - 60W
Magnet Diameter - 65 mm
Mounting Depth - 44.5 mm




RS-A 1073
Loudspeaker set 100 mm RS-A 1073
10cm Coaxial-Speaker

Maximal power: 70W
aluminium voice coil

installation diameter: 91mm
magnet diameter: 70mm
installation depth: 39,5mm

Content: 1 Pair

EL100
Speaker 2-ways 100mm 70W 1 Pair
10cm Coaxial-Speaker

Maximal power: 70W
aluminium voice coil

installation diameter: 91mm
magnet diameter: 70mm
installation depth: 39,5mm

Content: 1 Pair

EL100
Speaker 2-ways 100mm 70W 1 Pair
10cm Coaxial-Speaker

Maximal power: 80W

Installation diameter: 90mm
Installation depth: 42mm

Content: 1 Pair


ML100
Speaker 2-ways 100mm 80W 1 Pair
10cm Coaxial-Speaker

Maximal power: 80W

Installation diameter: 90mm
Installation depth: 42mm

Content: 1 Pair


ML100
Speaker 2-ways 100mm 80W 1 Pair
13cm Coaxial-Speaker

Maximal power: 80W
aluminium voice coil

Installation diameter: 114 mm
Magnet diameter: 70 mm
Installation depth: 45,5 mm

Content: 1 Pair



EL130
Speaker 2-ways 130mm 80W 1 Pair
13cm Coaxial-Speaker

Maximal power: 80W
aluminium voice coil

Installation diameter: 114 mm
Magnet diameter: 70 mm
Installation depth: 45,5 mm

Content: 1 Pair



EL130
Speaker 2-ways 130mm 80W 1 Pair
16,5cm Coaxial-Speaker

Maximal power: 100W

Installation diameter: 145mm
Magnet diameter: 100mm
Installation depth: 58mm

Content: 1 Pair


EL165
Speaker 2-ways 165mm 100W 1 Pair
16,5cm Coaxial-Speaker

Maximal power: 100W

Installation diameter: 145mm
Magnet diameter: 100mm
Installation depth: 58mm

Content: 1 Pair


EL165
Speaker 2-ways 165mm 100W 1 Pair
4X6" Coaxial-Speaker

Composition: Paper cone/ Steel basket
Suspension: Foam
Power: 50 Watt/max
Freq.Response: 60-20KHz
Sensitivity: 91dB (1W/1mt)
Impedance: 4 OHM
Voice coil: 25 mm

Content: 1 Pair


EL4X6
Speaker 2-ways 4X6" 50W 1 Pair
4X6" Coaxial-Speaker

Composition: Paper cone/ Steel basket
Suspension: Foam
Power: 50 Watt/max
Freq.Response: 60-20KHz
Sensitivity: 91dB (1W/1mt)
Impedance: 4 OHM
Voice coil: 25 mm

Content: 1 Pair


EL4X6
Speaker 2-ways 4X6" 50W 1 Pair
RS-A1373

Diameter - Ø 130 mm
Cone - Polypropylen
Tweeters - Mylar
Frequency Response - 95HZ ~ 20KHZ
Impedance - 4 Ohm
Sensitivity - 85dB
Rated Power (RMS) - 25W
Peak Power - 75W
Magnet Diameter - 70 mm
Mounting Depth - 46.5 mm




RS-A 1373
Loudspeaker set 130 mm RS-A 1373
RS-A1373

Diameter - Ø 130 mm
Cone - Polypropylen
Tweeters - Mylar
Frequency Response - 95HZ ~ 20KHZ
Impedance - 4 Ohm
Sensitivity - 85dB
Rated Power (RMS) - 25W
Peak Power - 75W
Magnet Diameter - 70 mm
Mounting Depth - 46.5 mm




RS-A 1373
Loudspeaker set 130 mm RS-A 1373
RS-A1674

Diameter - Ø 165 mm
Cone - Polypropylen
Tweeters - Mylar
Frequency Response - 85HZ ~ 20KHZ
Impedance - 4 Ohm
Sensitivity - 85dB
Rated Power (RMS) - 30W
Peak Power - 90W
Magnet Diameter - 80 mm
Mounting Depth - 53 mm





RS-A 1674
Loudspeaker set 165 mm RS-A 1674
RS-A1674

Diameter - Ø 165 mm
Cone - Polypropylen
Tweeters - Mylar
Frequency Response - 85HZ ~ 20KHZ
Impedance - 4 Ohm
Sensitivity - 85dB
Rated Power (RMS) - 30W
Peak Power - 90W
Magnet Diameter - 80 mm
Mounting Depth - 53 mm





RS-A 1674
Loudspeaker set 165 mm RS-A 1674
Midrange
2 x 6.5" BMW Under-seat Subwoofers Direct Fit in Housings 200 Watts RMS

The Kit contains two 6.5" subwoofer drivers each mounted in a pre-tuned frame, marked left and right hand for underseat fitment.

The subwoofers were designed as direct bolt in replacements for theoriginal factory fitted units, but with a greatly improved bass output.

Specifications
            
Woofer size            6,5" (165 mm) x 2
Impedance            4 ohm
Power handling capacity            120 W RMS
Max power handling capacity            200 W RMS
Frequency range            25-2500 Hz
Sensitivity            84,2 dB (1W/1m)
Magnet size            58 mm (2,28") Neodymium

CS-BMW UPi6
2x 6.5" BMW Under-seat Subwoofers 120 WRMS 1 x pair
2 x 6.5" BMW Under-seat Subwoofers Direct Fit in Housings 200 Watts RMS

The Kit contains two 6.5" subwoofer drivers each mounted in a pre-tuned frame, marked left and right hand for underseat fitment.

The subwoofers were designed as direct bolt in replacements for theoriginal factory fitted units, but with a greatly improved bass output.

Specifications
            
Woofer size            6,5" (165 mm) x 2
Impedance            4 ohm
Power handling capacity            120 W RMS
Max power handling capacity            200 W RMS
Frequency range            25-2500 Hz
Sensitivity            84,2 dB (1W/1m)
Magnet size            58 mm (2,28") Neodymium

CS-BMW UPi6
2x 6.5" BMW Under-seat Subwoofers 120 WRMS 1 x pair
Scandinavia 6.5" Midoofer with Aluminium Cone 200 WRMS
            
DLS Scandinavia 165W is a bass / mid driver specially designed for competition use in active or passive 3-way systems.
The extreme audio performance makes it a winner in every Pro installation.
Come in pairs.
Grilles are included.

FEATURES AND BENEFITS:
Extreme audio performance, transparent and clear sound
Great attack and delay
High resolution and dynamics
Linear spider design
Extremely low distortion
Aluminium cone body
Passive filters can be bought separately

Rec. X-over frequency highpass: 50-60 Hz.
Rec- x-over frequency lowpass 180-300Hz
Rec. speaker cable: DLS HQS 2 x 2,5 mm.
Rec. box: sealed 7-9 litres.

Specifications            

I
mpedance            4 ohm
Description / type            6,5" woofer
Outer diameter            165 mm / 6,5"
Recommended amplifier            50 - 200 Watt
Frequency range            30 Hz - 500 Hz
Fs - Resonant frequency            52,4 Hz
Sensitivity            84,3 dB
Mounting hole            140 mm / 5,51"
Mounting depth            68 mm / 2,67"
EAN Bar code            7331644824800
T/S parameters
single V/C            
Fs             52             Hz              Re             3,3             Ohm              Qms             3,13            
Vas             9,5             liter              Vas             0,33             Cuft              Qes             0,8            
Qts             0,64                          Sd                          cm²              BL             6,59            

CD-SCAND-165Wi
Scandinavia 6.5" Midwoofer Aluminium Cone 200 WRMS
Scandinavia 6.5" Midoofer with Aluminium Cone 200 WRMS
            
DLS Scandinavia 165W is a bass / mid driver specially designed for competition use in active or passive 3-way systems.
The extreme audio performance makes it a winner in every Pro installation.
Come in pairs.
Grilles are included.

FEATURES AND BENEFITS:
Extreme audio performance, transparent and clear sound
Great attack and delay
High resolution and dynamics
Linear spider design
Extremely low distortion
Aluminium cone body
Passive filters can be bought separately

Rec. X-over frequency highpass: 50-60 Hz.
Rec- x-over frequency lowpass 180-300Hz
Rec. speaker cable: DLS HQS 2 x 2,5 mm.
Rec. box: sealed 7-9 litres.

Specifications            

I
mpedance            4 ohm
Description / type            6,5" woofer
Outer diameter            165 mm / 6,5"
Recommended amplifier            50 - 200 Watt
Frequency range            30 Hz - 500 Hz
Fs - Resonant frequency            52,4 Hz
Sensitivity            84,3 dB
Mounting hole            140 mm / 5,51"
Mounting depth            68 mm / 2,67"
EAN Bar code            7331644824800
T/S parameters
single V/C            
Fs             52             Hz              Re             3,3             Ohm              Qms             3,13            
Vas             9,5             liter              Vas             0,33             Cuft              Qes             0,8            
Qts             0,64                          Sd                          cm²              BL             6,59            

CD-SCAND-165Wi
Scandinavia 6.5" Midwoofer Aluminium Cone 200 WRMS
Scandinavia 6.5" Woofer with Fibre Glass Cone 200 WRMS

DLS Scandinavia 165 is a bass driver specially designed for competition use. The speaker data makes it perfect as mid bass in 2-way configurations.
The extreme audio performance makes it a winner in every Pro installation.
Come in pairs.
Grilles are included.
Fibre glass cone body.
FEATURES AND BENEFITS:
Extreme audio performance, transparent and clear sound
Great imaging and staging capabilities
High resolution and dynamics
Extremely low distortion

Rec. X-over frequency high pass: 50-60 Hz
Rec X-over frequency low pass: 3-4 kHz
Rec. speaker cable: DLS HQS 2 x 2,5 mm.
Optimized for door panel mount but can also be used in sealed boxes of 9 litre (0,31 cuft)

Specifications

Description / type 6,5" mid bass driver
Outer diameter 165 mm / 6,5"
Impedance 4 ohm
Recommended amplifier 50 - 200 Watt
Frequency range 50-4500 Hz
Fs - Resonant frequency 61 Hz
Sensitivity 91,9 dB
Mounting hole 140 mm / 5,51"
Mounting depth 65 mm / 2,56"
T/S parameters
single V/C
Fs 61 Hz Hz Re 3,3 Ohm Qms 15,6
Vas 10,2 liter Vas 0,36 Cuft Qes 0,55
Qts 0,54 Sd 131 cm² BL 6,1
EAN Bar code 73316440824701
CD-SCAND-165
Scandinavia 6.5" Midwoofer Fibre Glass Cone 200 WRM
Scandinavia 6.5" Woofer with Fibre Glass Cone 200 WRMS

DLS Scandinavia 165 is a bass driver specially designed for competition use. The speaker data makes it perfect as mid bass in 2-way configurations.
The extreme audio performance makes it a winner in every Pro installation.
Come in pairs.
Grilles are included.
Fibre glass cone body.
FEATURES AND BENEFITS:
Extreme audio performance, transparent and clear sound
Great imaging and staging capabilities
High resolution and dynamics
Extremely low distortion

Rec. X-over frequency high pass: 50-60 Hz
Rec X-over frequency low pass: 3-4 kHz
Rec. speaker cable: DLS HQS 2 x 2,5 mm.
Optimized for door panel mount but can also be used in sealed boxes of 9 litre (0,31 cuft)

Specifications

Description / type 6,5" mid bass driver
Outer diameter 165 mm / 6,5"
Impedance 4 ohm
Recommended amplifier 50 - 200 Watt
Frequency range 50-4500 Hz
Fs - Resonant frequency 61 Hz
Sensitivity 91,9 dB
Mounting hole 140 mm / 5,51"
Mounting depth 65 mm / 2,56"
T/S parameters
single V/C
Fs 61 Hz Hz Re 3,3 Ohm Qms 15,6
Vas 10,2 liter Vas 0,36 Cuft Qes 0,55
Qts 0,54 Sd 131 cm² BL 6,1
EAN Bar code 73316440824701
CD-SCAND-165
Scandinavia 6.5" Midwoofer Fibre Glass Cone 200 WRM

Cookie tracking for the best experience

Mit der Auswahl "Akzeptiere Tracking" erlauben Sie uns die Verwendung von Cookies, Pixeln, Tags und ähnlichen Technologien. Wir nutzen diese Technologien, um Ihre Geräte- und Browsereinstellungen zu erfahren, damit wir Ihre Aktivität nachvollziehen können. Dies tun wir, um die Funktionalität der Website sicherzustellen und stetig zu verbessern. Wir können diese Daten an Dritte – etwa Social Media Werbepartner wie Google, Facebook und Instagram – zu Marketingzwecken weitergeben. Bitte besuchen Sie unsere Datenschutzerklärung für weitere Informationen. Dort erfahren Sie auch wie wir Ihre Daten für erforderliche Zwecke wie z.B. Sicherheit, Warenkorbfunktion, Anmeldung verwenden.