Um die Webseite optimal gestalten und fortlaufend verbessern zu können, verwendet acvgmbh.de Cookies. Durch die weitere Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. Weitere Informationen Ok
Total (0): 0,00 € Checkout
German
English
Main pageOrder historyRecall listMy Account
 
 
 

DLS >

Part-No.: CA-CC1000   
Reference Line Monoblock Amplifier 1000 WRMS

Price on request* , plus Shipping details
Monoblock Amplifier 1000 WRMS 1000 WRMS @ 1OHM 700 WRMS @ 2OHM 450 WRMS @ 4OHM CC-1000 is a compact and powerful mono amplifier with a power of 1000 Watts RMS @ 1 ohm load. A popular and good power amplifier with high reliability.An amplifier for both amateurs and professionals.Built-in low-pass filter for subwoofers, variable between 35 and 250 Hz. Selectable 12 / 24 dB slope.Built-in protection circuits shut down the amplifier in the event of overloadsBASS BOOST adjustable 0 - +6 dB.Damping factor >150S/N ratio, A weighted: 92 dBRemote bass level control is includedHigh level input with automatic start.RMS output power @ 14,4 VSpecifications            Number of channels            1Amplifier class            DOutput power in 1 ohm            1000 W RMSOutput power in 2 ohm            700 W RMSOutput power in 4 ohm            440 W RMSDamping factor            > 154S/N ratio, A-weighted            > 92 dBFrequency range            10 Hz - 500 HzLow level output            NoInput sensitivity            1 - 4 VInput impedance            22 kohmInput impedance, high level            45 ohmHigh pass filter            Subsonic 30 Hz, ON/OFFLow pass filter            35 - 250 Hz, 12 or 24 dB slopeGrand bass filter            Bass boost 0- +6dB variablePhase control for subwoofers            0 or 180 degrees switchHigh level input with auto start            YesRemote phase shift control            NoPower consumption (idle)            0,6 ARemote bass level control            YesPower consumption (max)            102 AIntegrated fan            NoRec. power cable            2AWG / 33 mm2Fuses            Use external fuse 100 ADimension (W x D x H)            129 x 368 x 55 mm / 5,07 x 14,48 x 2,16"Weight            2,9 kg / 6,4 lbEAN Bar code            7331644329305

Part-No.: CA-CCi2   
Reference Line 2 Channel Amplifier 2 x 170 WRMS

Price on request* , plus Shipping details
2 Channel Amplifier 2 x 170 WRMS            The new improved CCi2 is a small and powerful amplifier with a RMS power output of 2 x 170 Watts. In 4 ohm mono bridge-connection, it puts out all of 340 Watts.Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.The high-pass filter is also variable between 50 and 500 Hz.Built-in protection circuits shut down the amplifier in the event of overloads.High level input with AUTO-start function makes it easier to connect to factory installed head units.Bass EQ variabel fron 0 till +6dB.THD at 5W, 1 kHz: 150Signal to noise ratio, A-weighted: 110 dBSpecifications            Number of channels            2Amplifier class            ABMono bridge mode 4 ohm            340 WattOutput power in 2 ohm            2 x 170 WattOutput power in 4 ohm            2 x 110 WattDamping factor            > 150S/N ratio, A-weighted            > 110 dBFrequency range            10 Hz - 50 kHzInput sensitivity            1 - 4 VoltInput impedance            6 kohmInput impedance, high level            45 ohmHigh pass filter            50 - 500 HzLow pass filter            50 - 500 HzGrand bass filter            Bass EQ +6dB @ 60 HzLow level output            NoHigh level input with auto start            YesPower consumption (idle)            0,5 APower consumption (max)            43 AIntegrated fan            YesFuses            Use external fuse 40ADimension (W x D x H)            129 x 260 x 54 mm ( 5,1" x 10,2" x 2,1")Weight            1,87 kg

Part-No.: CA-CCi500   
Mono Amplifier 1 x 500 WRMS

Price on request* , plus Shipping details
Mono Amplifier 1 x 500 WRMS 500 WRMS @ 1OHM 370 WRMS @ 2OHM 200 WRMS @ 4OHM CCi500 is a compact and powerful mono amplifier with a power of 550 Watts RMS @ 1 ohm load.A popular and good power amplifier with high reliability.An amplifier for both amateurs and professionals.Built-in low-pass filter for subwoofers, variable between 35 and 250 Hz. Selectable 12 / 24 dB slope.Built-in protection circuits shut down the amplifier in the event of overloadsBASS BOOST adjustable 0 - +6 dB.Damping factor >140S/N ratio, A weighted: 92 dBRemote bass level control is includedHigh level input with automatic start.RMS output power @ 14,4 VSpecifications            Number of channels            1Amplifier class            DOutput power in 1 ohm            550 W RMSOutput power in 2 ohm            370 W RMSOutput power in 4 ohm            200 W RMSDamping factor            > 140S/N ratio, A-weighted            > 92 dBFrequency range            10 Hz - 2500 HzLow level output            NoInput sensitivity            1 - 4 VInput impedance            22 kohmInput impedance, high level            45 ohmHigh pass filter            Subsonic 30 Hz, ON/OFFLow pass filter            35 - 250 Hz, 12 or 24 dB slopeGrand bass filter            Bass boost 0- +6dB variablePhase control for subwoofers            0 or 180 degrees switchHigh level input with auto start            YesRemote phase shift control            NoPower consumption (idle)            0,8 ARemote bass level control            YesPower consumption (max)            80 AIntegrated fan            YesRec. power cable            2AWG / 33 mm2Fuses            Use external fuse 60 ADimension (W x D x H)            129 x 304 x 51 mm / 5,07 x 11,96 x 2"Weight            2,4 kg / 5,3 lb

Part-No.: CA-DD31T   
24 Volt 3 Channel Class D Amplifier 2x80 WRMS + 1x200 WRMS

Price on request* , plus Shipping details
24 Volt 3 Channel digital Amplifier 2x80 Watts + 1x200 WRMS            DD31T is a small and powerful class D amplifier with power output of 2 x 125 + 1x 350 Watts RMS in 2 ohm, and in 4 ohm 2 x 80 + 1 x 200 Watts.A good sounding amplifier for both amateurs and professionells.Built-in/switchable low pass and high pass filters.Damping factor >80Signal to noise ratio, A-weighted: 90 dBAUX inputHi level input with Auto start            Specifications            Number of channels            3Amplifier class            DOutput power in 2 ohm            2 x 125 WattOutput power in 4 ohm            2 x 80 WattMono sub channel 2 ohm            350 WattMono sub channel 4 ohm            200 WattDamping factor            >80S/N ratio, A-weighted            >90 dBFrequency range            10 Hz - 20 kHzInput sensitivity            1 - 4 VoltInput impedance            22 kohmInput impedance, high level            40 ohmHigh level input with auto start            YesRemote bass level control            YesLow level output            YesRemote phase shift control            NoLow pass filter            50-250 HzHigh pass filter            40-400 HzGrand bass filter            +0-18 dBPower consumption (idle)            0,6 APower consumption (max)            60 AFuses            use external fuseDimension (W x D x H)            103 x 215 x 35 (4,0 x 8,5 x 1,4)Weight            3 kgEAN Bar code            7331644030201

Part-No.: CA-HLC4.2   
High Level Line Output Converter with autosense/bass remote

Price on request* , plus Shipping details
High Level Line Output Converter with autosense/bass remoteThis converter is designed for use with head units in cars without RCA low level output from the head unit. Most modern car amplifiers are equipped with high level inputs and these work OK with older factory radios but often will not work with modern head units especially if they have digital output chips.This converter is designed to work with all head units thanks to fully balanced input circuits.The converter can be used for both 2 -and 4 -channel amplifiers and have up to 3v output to minimize noise in amp input section. Perfect for adding subwoofer to a OEM system with the EBC external remote.Note: If using in 2 channel mode channels 1 & 2 must be connected for the signal sensing circuit to function.Technical facts HLC4Number of channels: 4Power supply: 12 V DC (min 10,8, max 15,6V)Current draw, no signal: 4 mACurrent draw, operational: Typical 25 mAOutput voltage: 3 V RMSDistortion: 0,002% THD @ 3V output, 10 kohm loadClip point: 3,7 V RMS @ 14,4 V power supplyOutput impedance: 200 ohms nominalInput impedance: Ch. 1: 44 ohms, Ch. 2-4: 100 ohms, All channels are fully balancedSensing modes: DC level or Audio, both operate on Ch. 1 only.Remote output: 12 Volts, max 100 ma max, protected against short term short circuitIndicators: Green= Remote on, Blue = Audio sensing activeReverse polarity protected.Summing output ch 3 + 4 for subwoofer amp when used with optional EBC

Part-No.: CA-P10   
Performance RAW Monoblock Amplifier 1 x 450 WRMS

Price on request* , plus Shipping details
Performance RAW Monoblock Amplifier 1 x 450 WRMS450 WRMS @ 2OHM260 WRMS @ 4OHMP10 is a compact and powerful mono amplifier with peak music power of 450 Watts @ 2 ohm load.A popular and good raw power amplifier with high reliability.Built-in low-pass filter for subwoofers, variable between 50 and 200 Hz.With the filter disconnected the amplifier works as a fullrange amplifier.Built-in protection circuits shut down the amplifier in the event of overloadsBASS BOOST switch, +6 dB.Remote bass level control is includedHigh level input with automatic start.Cooling fan in the bottom plate.RMS output power @ 14,4 VSpecifications            Number of channels            1Amplifier class            ABPeak power            800 WOutput power in 2 ohm            450 W RMSOutput power in 4 ohm            260 W RMSDamping factor            > 80S/N ratio, A-weighted            > 95 dBFrequency range            10 Hz - 30 kHzLow level output            NoInput sensitivity            0,25 - 5 VInput impedance            22 kohmInput impedance, high level            47 ohmHigh pass filter            yesLow pass filter            50 - 500 HzGrand bass filter            Bass boost OFF - +6dBHigh level input with auto start            YesRemote phase shift control            NoPower consumption (idle)            0,5 ARemote bass level control            YesPower consumption (max)            50 AIntegrated fan            YesFuses            2 x 25 ADimension (W x D x H)            189 x 322 x 51 mm / 7,44 x 12,67 x 2"Weight            3 kgEAN Bar code            7331644079101

Part-No.: CA-P20   
Performance RAW 2 Channel Amplifier 2 x 70 WRMS

Price on request* , plus Shipping details
Performance 300 W RAW 2 Channel Amplifier 2 x 70 WRMS            P20 is a small and powerful amplifier with a peak power output of 2 x 70 Watts. In 4 ohm mono bridge-connection, it puts out all of 200 Watts.Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.The high-pass filter is also variable between 50 and 500 Hz.Built-in protection circuits shut down the amplifier in the event of overloads.High level input with AUTO-start function makes it easier to connect to factory installed head units.Bass EQ function in two steps, +6dB or +12 dB.SQ tuned in England!Specifications            Number of channels            2Amplifier class            ABMono bridge mode 4 ohm            200 WattOutput power in 2 ohm            2 x 100 WattOutput power in 4 ohm            2 x 70 Watt vid 0,1% THDDamping factor            > 80S/N ratio, A-weighted            > 95 dBFrequency range            10 Hz - 30 kHzInput sensitivity            0,25 - 5 VoltInput impedance            22 kohmInput impedance, high level            47 ohmHigh pass filter            50 - 500 HzLow pass filter            50 - 500 HzGrand bass filter            Bass EQ +6dB / +12 dB @ 50 HzLow level output            NoHigh level input with auto start            YesPower consumption (idle)            0,4 APower consumption (max)            25 ARec. power cable            16 sq mm ( 5 AWG)Fuses            1 x 25 ADimension (W x D x H)            189 x 210 x 46 mm ( 744" x 8,26" x 1,81")Weight            2 kg

Part-No.: CA-P40   
Performance RAW 4 Channel Amplifier 4 x 70 WRMS

Price on request* , plus Shipping details
Performance 600 W RAW 4 Channel Amplifier 4 x 70 WattsP40 is a small and powerful amplifier with power output of 4 x 70 Watts peak power, and in mono bridge-connection, it puts out all of 2 x 200 Watts.Built-in/switchable low pass and high pass filters.Bass EQ @ 50 Hz: + 6dB / + 12 dB.Built-in protection circuits shut down the amplifier in the event of overloads.Hi level input with Auto startUse it for a front system and a subwoofer.SQ tuned in England!Specifications            Number of channels            4Amplifier class            ABPeak power            4 x 150 WattOutput power in 2 ohm            4 x 100 WattOutput power in 4 ohm            4 x 70 WattMono bridge mode 4 ohm            2 x 200 WattDamping factor            >80S/N ratio, A-weighted            >90 dBFrequency range            10 Hz - 30 kHzInput sensitivity            0,25 - 5 VoltInput impedance            22 kohmInput impedance, high level            47 ohmHigh level input with auto start            YesRemote bass level control            NoLow level output            NoRemote phase shift control            NoGrand bass filter            Bass EQ @ 50 Hz: +6db / +12 dBPower consumption (idle)            0,5 APower consumption (max)            50 ARec. power cable            16 sq mm ( 5 AWG)Fuses            2 x 25 ADimension (W x D x H)            189 x 322 x 46 mm (7,44" x 12,67" x 1,81")Weight            3 kgEAN Bar code            7331644079408

Part-No.: CA-P44   
Performance RAW 4 Channel Amplifier 4 x 100 WRMS

Price on request* , plus Shipping details
Performance 1000 W RAW 4 Channel Amplifier 4 x 100 WattsP44 is a small and powerful amplifier with power output of 4 x 100 Watts peak power, and in mono bridge-connection, it puts out all of 2 x 280 Watts.Built-in/switchable low pass and high pass filters.Bass EQ @ 50 Hz: + 6dB.Built-in protection circuits shut down the amplifier in the event of overloads.Hi level input with Auto startUse it for a front system and a subwoofer.SQ tuned in England!Specifications            Number of channels            4Amplifier class            ABOutput power in 2 ohm            4 x 140 WattOutput power in 4 ohm            4 x 100 WattMono bridge mode 4 ohm            2 x 280 WattDamping factor            >80S/N ratio, A-weighted            >95 dBFrequency range            10 Hz - 30 kHzInput sensitivity            0,25 - 5 VoltInput impedance            22 kohmInput impedance, high level            47 ohmHigh level input with auto start            YesRemote bass level control            NoLow level output            NoRemote phase shift control            NoGrand bass filter            Bass EQ @ 50 Hz: +6dbPower consumption (idle)            0,7 APower consumption (max)            80 ARec. power cable            16 sq mm ( 5 AWG)Fuses            2 x 40 ADimension (W x D x H)            189 x 400 x 46 mm (7,44" x 12,67" x 1,81")Weight            4 kgEAN Bar code            7331644079408
< Previous page
page 1 of 3
articles per page: 20  25  50 
Next page >
*All prices are quoted , Shipping.

 
 
 
 
 
 
 
We only deliver to Resellers, Distributors and industry partners.