2-DIN Kit VW Polo/T6.1 2018-2021 MIB II PQ Infodapter
Part-no.:
621320-37-1
EAN:
4026724340914
Stock:
in stock
Facia plate 2-DIN and HU Adapter Kit VW

Many car manufacturers install car specific head units to fit the optical
picture of the dashboard.

Installation kits include all components for replacing an OEM HU.
Depending on the vehicle's equipment, all adapters and interfaces required to operate the retrofit device and restore vehicle functions are included in the scope of delivery.

Please check the installation recommendations for the individual components.
In some cases, not all vehicle functions are supported.
For example, Trailer Assist, E Call, or other driver assistance systems.

Please check the OEM HU and vehicle settings for available settings bevore installation.
Please check all functions bevor final installation.
Also check our listed OEM head units and compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.

Please contact our support team for help.
02431-9645-96
support@acvgmbh.de

Note:

vehicles with SWC

CAN Bus

connector: 52 Pin Quadlock VAG
connector: Fakra(m) > DIN

vehicles with MIB II system

HU with max. mounting depht of 150mm

to enter settings connect the reverse signal output (purple/white) to HU
visualisation of the settings connect and configure the rear view camera input of the HU

for vehicles with OEM MIB II systems and composition media 8" touch screens
operate the CAR vehicle setting menue with the SWC keys /no swich panel necessary

E-Call not supported
E-Call interface for different vehicles E-Call function retention MAN/Seat/Skoda/VW 52 Pin Quadlock: 1424-28

Not for vehicles:

with OEM Most amplified system
with open dash
without any OEM preparation (SWC, Speakers, Head Unit)

vehicles with parking assistance front PDC is shown after ignition in display
vehicles with +8,5V antenna system Antenna adapter Fakra(m)(doppel) > DIN(m) 8.5V phantom power: 1524-29

Vehicle application:
VW Polo 2018 - 2021
VW T6.1 2019 - 2021*

Colour: black

Following signals are provided:

Ignition
Illumination
Reverse
Speedpulse
Parkingbreak

SWC
visualisation climate control
visualisation OPS
vehicle settings

*facia must be modified

Scope of delivery:

2-DIN facia plate VW Polo/T 6.1 schwarz: 381320-37-1
Infodapter MAN TGE/Seat/VW 52 Pin Quadlock: 43uvw04
SWC ACV lead > Multilead different HU: 42ctmultilead
Antenna adapter Fakra(m)(doppel) > DIN(m) 8.5V phantom power: 1524-29
Antenna adapter Fakra(m)(Set) > DIN(m) 12V phantom power:1524-70

Optional:

Rear View Camera Adapter VW MIB II PQ: 771324-37


show more

Sales Team

Anne-Cathrin Klüh - Sales 
Leon Vangelis - Sales

You can contact us via e-mail: order@acvgmbh.de
Phone: 02431/964580
Facia plate 2-DIN and HU Adapter Kit VW

Many car manufacturers install car specific head units to fit the optical
picture of the dashboard.

Installation kits include all components for replacing an OEM HU.
Depending on the vehicle's equipment, all adapters and interfaces required to operate the retrofit device and restore vehicle functions are included in the scope of delivery.


Please check the installation recommendations for the individual components.
In some cases, not all vehicle functions are supported.
For example, Trailer Assist, E Call, or other driver assistance systems.

Please check the OEM HU and vehicle settings for available settings bevore installation.
Please check all functions bevor final installation.
Also check our listed OEM head units and compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.

Please contact our support team for help.
02431-9645-96
support@acvgmbh.de

Note:

vehicles with SWC

CAN Bus

connector: 52 Pin Quadlock VAG
connector: Fakra(m) > DIN

vehicles with MIB II system

HU with max. mounting depht of 150mm

to enter settings connect the reverse signal output (purple/white) to HU
visualisation of the settings connect and configure the rear view camera input of the HU

for vehicles with OEM MIB II systems and composition media 8" touch screens
operate the CAR vehicle setting menue with the SWC keys /no swich panel necessary

E-Call not supported
E-Call interface for different vehicles E-Call function retention MAN/Seat/Skoda/VW 52 Pin Quadlock: 1424-28

Not for vehicles:

with OEM Most amplified system
with open dash
without any OEM preparation (SWC, Speakers, Head Unit)

vehicles with
parking assistance front PDC is shown after ignition in display
vehicles with +8,5V antenna system Antenna adapter Fakra(m)(doppel) > DIN(m) 8.5V phantom power: 1524-29


Vehicle application:
VW Polo 2018 - 2021
VW T6.1 2019 - 2021*


Colour: black

Following signals are provided:

Ignition
Illumination
Reverse
Speedpulse
Parkingbreak

SWC
visualisation climate control
visualisation OPS
vehicle settings

*facia must be modified

Scope of delivery:

2-DIN facia plate VW Polo/T 6.1 schwarz: 381320-37-1
Infodapter MAN TGE/Seat/VW 52 Pin Quadlock: 43uvw04
SWC ACV lead > Multilead different HU: 42ctmultilead
Antenna adapter Fakra(m)(doppel) > DIN(m) 8.5V phantom power: 1524-29
Antenna adapter Fakra(m)(Set) > DIN(m) 12V phantom power:1524-70

Optional:

Rear View Camera Adapter VW MIB II PQ: 771324-37


Highlights
New products

Cookie tracking for the best experience

Mit der Auswahl "Akzeptiere Tracking" erlauben Sie uns die Verwendung von Cookies, Pixeln, Tags und ähnlichen Technologien. Wir nutzen diese Technologien, um Ihre Geräte- und Browsereinstellungen zu erfahren, damit wir Ihre Aktivität nachvollziehen können. Dies tun wir, um die Funktionalität der Website sicherzustellen und stetig zu verbessern. Wir können diese Daten an Dritte – etwa Social Media Werbepartner wie Google, Facebook und Instagram – zu Marketingzwecken weitergeben. Bitte besuchen Sie unsere Datenschutzerklärung für weitere Informationen. Dort erfahren Sie auch wie wir Ihre Daten für erforderliche Zwecke wie z.B. Sicherheit, Warenkorbfunktion, Anmeldung verwenden.

Accept tracking
Change tracking settings