Um die Webseite optimal gestalten und fortlaufend verbessern zu können, verwendet acvgmbh.de Cookies. Durch die weitere Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. Weitere Informationen Ok
FirmaRechtlichesVersandReklamationImpressumDatenschutz
Sie sind nicht angemeldet. [ Anmelden ]
Summe (0): 0,00 € zur Kasse
German
English
StartseiteBestellcenterMerklisteMein Account
Neue Artikel A2DP Bluetooth Module
Aktivsystemadapter
Antennen + Zubehör
AUX-In
CAN-Bus Adapter
CD-Wechslerkabel
DAB+ Tuner
Dash Cam
DLS
Verstärker
Lautsprecher
Entriegelungsbügel
Gehäuse / Kontakte
Gold-Installationsprogramm
Infodapter
Installationsmaterial
Lautsprecher
Lautsprecheradapterkabel
Lautsprechergitter
Lautsprecherkabel
Lautsprecherringe
Lenkradfernbedienung
Metalleinbaurahmen
Multimedia
OBD-Anschluss
PAC
Radioanschlusskabel
Radioblenden
Restposten
Rückfahrkamera / Monitore
Stromkabel
T-Kabelsätze
TV / Video Free
USB / AUX / HDMI Austausch Kit
USB Interfaces
USB Ladeadapter
Werkzeuge
Wireless Charging - INBAY
 
 
 

DLS >

Artnr.: CA-CC1000   
Reference Line Mono Verstärker 1 x 1000 WRMS

Preis auf Anfrage* , zzgl. Versand Details
Mono Verstärker 1000 Watt   1000 WRMS @ 1OHM 700 WRMS @ 2OHM  450 WRMS @ 4OHM   CC-1000 is a compact and powerful mono amplifier with a power of 1000 Watts RMS @ 1 ohm load. A popular and good power amplifier with high reliability. An amplifier for both amateurs and professionals. Built-in low-pass filter for subwoofers, variable between 35 and 250 Hz. Selectable 12 / 24 dB slope. Built-in protection circuits shut down the amplifier in the event of overloads BASS BOOST adjustable 0 - +6 dB. Damping factor >150 S/N ratio, A weighted: 92 dB Remote bass level control is included High level input with automatic start. RMS output power @ 14,4 V Specifications Number of channels 1 Amplifier class D Output power in 1 ohm 1000 W RMS Output power in 2 ohm 700 W RMS Output power in 4 ohm 440 W RMS Damping factor > 154 S/N ratio, A-weighted > 92 dB Frequency range 10 Hz - 500 Hz Low level output No Input sensitivity 1 - 4 V Input impedance 22 kohm Input impedance, high level 45 ohm High pass filter Subsonic 30 Hz, ON/OFF Low pass filter 35 - 250 Hz, 12 or 24 dB slope Grand bass filter Bass boost 0- +6dB variable Phase control for subwoofers 0 or 180 degrees switch High level input with auto start Yes Remote phase shift control No Power consumption (idle) 0,6 A Remote bass level control Yes Power consumption (max) 102 A Integrated fan No Rec. power cable 2AWG / 33 mm2 Fuses Use external fuse 100 A Dimension (W x D x H) 129 x 368 x 55 mm / 5,07 x 14,48 x 2,16" Weight 2,9 kg / 6,4 lb EAN Bar code 7331644329305 DLS Nr CCi1000

Artnr.: CA-CCi2   
Reference Line 2 Kanal Verstärker 2 x 170 WRMS

Preis auf Anfrage* , zzgl. Versand Details
2 Kanal Verstärker 2 x 170 Watt   The new improved CCi2 is a small and powerful amplifier with a RMS power output of 2 x 170 Watts. In 4 ohm mono bridge-connection, it puts out all of 340 Watts. Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz. The high-pass filter is also variable between 50 and 500 Hz. Built-in protection circuits shut down the amplifier in the event of overloads. High level input with AUTO-start function makes it easier to connect to factory installed head units. Bass EQ variabel fron 0 till +6dB. THD at 5W, 1 kHz: <0,02% Damping factor: >150 Signal to noise ratio, A-weighted: 110 dB Specifications Number of channels 2 Amplifier class AB Mono bridge mode 4 ohm 340 Watt Output power in 2 ohm 2 x 170 Watt Output power in 4 ohm 2 x 110 Watt Damping factor > 150 S/N ratio, A-weighted > 110 dB Frequency range 10 Hz - 50 kHz Input sensitivity 1 - 4 Volt Input impedance 6 kohm Input impedance, high level 45 ohm High pass filter 50 - 500 Hz Low pass filter 50 - 500 Hz Grand bass filter Bass EQ +6dB @ 60 Hz Low level output No High level input with auto start Yes Power consumption (idle) 0,5 A Power consumption (max) 43 A Integrated fan Yes Fuses Use external fuse 40A Dimension (W x D x H) 129 x 260 x 54 mm ( 5,1" x 10,2" x 2,1") Weight 1,87 kg DLS Nr. CCi2

Artnr.: CA-CCi4   
Reference Line 4 Kanal Verstärker 4 x 70 WRMS

Preis auf Anfrage* , zzgl. Versand Details
4-Kanal Verstärker mit 4 x 70 Watt Ausgangsleistung Der neue verbesserte CCi4 ist ein kompakter, aber kraftvoller Verstärker mit einer Ausgangsleistung von 4x70 Watt RMS im Stereobetrieb oder 2x140 Watt im gebrückten Monobetrieb. Ein gut klingender Verstärker für Beginner wie Fortgeschrittene. Integrierte/Schaltbare Tiefpass- und Hochpassfilter Dämpfungsfaktor >250 Signal-Rauschabstand: 110db(A) Klirrfaktor (THD) bei 5 Watt, 1kHz: < 0,02% Integrierte Schutzschaltung schaltet den Verstärker im Falle einer Überlastung aus Hochpegel-Eingang mit Auto-Start Perfekt geeignet zum Betrieb von Frontlautsprechern und einem Subwoofer. Spezifikationen: Anzahl Kanäle 4 Verstärkerklasse AB Ausgangsleistung an 2 Ohm 4 x 70 Watt Ausgangsleistung an 4 Ohm 4 x 50 Watt Mono gebrückt an 4 Ohm 2 x 140 Watt Dämpfungsfaktor >250 Signal-Rauschabstand >110 dB(A) Frequenzbereich 10 Hz - 55 kHz Eingangsempfindlichkeit 1 - 4 Volt Eingangsimpedanz 6 Kiloohm Eingangsimpedanz Hochpegel 45 ohm Hochpegeleingang Auto-Start Yes Basspegel Fernbedienung Nein Kleinsignalausgang Nein Remote phase shift control Nein HP/TP-Filter Kanal A & B HP 50 - 500 Hz, TP 50 - 500 Hz HP/TP-Filter Kanal C & D HP 50 - 500 Hz, TP 50 - 500 Hz Leistungsaufnahme 0,5 A Leistungsaufnahme (max.) 40 A Externe Sicherung 40 A Abmessungen (B x T x H) 129 x 320 x 54 mm (5,1" x 12,6" x 2,1") Gewicht 1,8 kg DLS Nr. CCi4

Artnr.: CA-CCi44   
Reference Line 4 Kanal Verstärker 4 x 110 WRMS

Preis auf Anfrage* , zzgl. Versand Details
4 Kanal Verstärker 4 x 110 Watt   The new improved CCi44 is a small and powerful amplifier with power output of 4 x 110 Watts RMS, and in mono bridge-connection, it puts out all of 2 x 220 Watts. A good sounding amplifier for both amateurs and professionells. Built-in/switchable low pass and high pass filters. Damping factor >300 Signal to noise ratio, A-weighted: 110 dB THD at 5W, 1 kHz. <0,02% Built-in protection circuits shut down the amplifier in the event of overloads. Hi level input with Auto start Use it for a front system and a subwoofer. Specifications Number of channels 4 Amplifier class AB Output power in 2 ohm 4 x 110 Watt Output power in 4 ohm 4 x 85 Watt Mono bridge mode 4 ohm 2 x 220 Watt Damping factor >300 S/N ratio, A-weighted >110 dB Frequency range 10 Hz - 60 kHz Input sensitivity 1 - 4 Volt Input impedance 6 kohm Input impedance, high level 45 ohm High level input with auto start Yes Remote bass level control No Low level output No Remote phase shift control No Integrated fan Yes Filters channel A & B HP 50 - 500 Hz, LP 50 - 500 Hz Filters channel C & D HP 50 - 500 Hz, LP 50 - 500 Hz Power consumption (idle) 0,7 A Power consumption (max) 64 A Fuses use external fuse 60A Dimension (W x D x H) 129 x 320 x 54 mm (5,1" x 12,6" x 2,1") Weight 2,4 kg DLS Nr. CCi44

Artnr.: CA-CCi44-40   
4 Kanal Verstärker 4 x 110 WRMS, ANNIVERSARY EDITION

Preis auf Anfrage* , zzgl. Versand Details
4 channel amplifier, ANNIVERSARY EDITION

Artnr.: CA-CCi500   
Reference Line Mono Verstärker 1 x 500 WRMS

Preis auf Anfrage* , zzgl. Versand Details
Mono Verstärker 1 x 500 WRMS   500 WRMS @ 1OHM 370 WRMS @ 2OHM 200 WRMS @ 4OHM CCi500 is a compact and powerful mono amplifier with a power of 550 Watts RMS @ 1 ohm load. A popular and good power amplifier with high reliability. An amplifier for both amateurs and professionals. Built-in low-pass filter for subwoofers, variable between 35 and 250 Hz. Selectable 12 / 24 dB slope. Built-in protection circuits shut down the amplifier in the event of overloads BASS BOOST adjustable 0 - +6 dB. Damping factor >140 S/N ratio, A weighted: 92 dB Remote bass level control is included High level input with automatic start. RMS output power @ 14,4 V Specifications Number of channels 1 Amplifier class D Output power in 1 ohm 550 W RMS Output power in 2 ohm 370 W RMS Output power in 4 ohm 200 W RMS Damping factor > 140 S/N ratio, A-weighted > 92 dB Frequency range 10 Hz - 2500 Hz Low level output No Input sensitivity 1 - 4 V Input impedance 22 kohm Input impedance, high level 45 ohm High pass filter Subsonic 30 Hz, ON/OFF Low pass filter 35 - 250 Hz, 12 or 24 dB slope Grand bass filter Bass boost 0- +6dB variable Phase control for subwoofers 0 or 180 degrees switch High level input with auto start Yes Remote phase shift control No Power consumption (idle) 0,8 A Remote bass level control Yes Power consumption (max) 80 A Integrated fan Yes Rec. power cable 2AWG / 33 mm2 Fuses Use external fuse 60 A Dimension (W x D x H) 129 x 304 x 51 mm / 5,07 x 11,96 x 2" Weight 2,4 kg / 5,3 lb  

Artnr.: CA-CCi500-40   
Mono Verstärker 1 x 500 WRMS ANNIVERSARY EDITION

Preis auf Anfrage* , zzgl. Versand Details
Mono Verstärker 500 W ANNIVERSARY EDITION

Artnr.: CA-DD31T   
24 Volt 3 Kanal Class D Verstärker 2x80 WRMS + 1x200 WRMS

Preis auf Anfrage* , zzgl. Versand Details
24 Volt 3 Channel digital Amplifier 2x80 Watt + 1x200 Watt DD31T is a small and powerful class D amplifier with power output of 2 x 125 + 1x 350 Watts RMS in 2 ohm, and in 4 ohm 2 x 80 + 1 x 200 Watts. A good sounding amplifier for both amateurs and professionells. Built-in/switchable low pass and high pass filters. Damping factor >80 Signal to noise ratio, A-weighted: 90 dB AUX input Hi level input with Auto start Specifications Number of channels 3 Amplifier class D Output power in 2 ohm 2 x 125 Watt Output power in 4 ohm 2 x 80 Watt Mono sub channel 2 ohm 350 Watt Mono sub channel 4 ohm 200 Watt Damping factor >80 S/N ratio, A-weighted >90 dB Frequency range 10 Hz - 20 kHz Input sensitivity 1 - 4 Volt Input impedance 22 kohm Input impedance, high level 40 ohm High level input with auto start Yes Remote bass level control Yes Low level output Yes Remote phase shift control No Low pass filter 50-250 Hz High pass filter 40-400 Hz Grand bass filter +0-18 dB Power consumption (idle) 0,6 A Power consumption (max) 60 A Fuses use external fuse Dimension (W x D x H) 103 x 215 x 35 (4,0 x 8,5 x 1,4) Weight 3 kg EAN Bar code 7331644030201 DLS Nr. DD31T

Artnr.: CA-DD33-40   
12 Volt 3 Kanal Class D Verstärker 2x80 WRMS + 1x200 WRMS

Preis auf Anfrage* , zzgl. Versand Details
12 Volt 3 Channel digital Amplifier 2x80 Watt + 1x200 Watt ANNIVERSARY EDITION   DLS Nr. DD33-40  

Artnr.: CA-HLC4.2   
High Level Line Output Converter mit autosense/bass remote

Preis auf Anfrage* , zzgl. Versand Details
High Level Line Output Converter with autosense/bass remote This converter is designed for use with head units in cars without RCA low level output from the head unit. Most modern car amplifiers are equipped with high level inputs and these work OK with older factory radios but often will not work with modern head units especially if they have digital output chips. This converer is designed to work with all head units thanks to fully balanced input circuits. The converter can be used for both 2 -and 4 -channel amplifiers and have up to 3v output to minimize noise in amp input section. Perfect for adding subwoofer to a OEM system with the EBC external remote. Note: If using in 2 channel mode channels 1 & 2 must be connected for the signal sensing circuit to function. Technical facts HLC4 Number of channels: 4 Power supply: 12 V DC (min 10,8, max 15,6V) Current draw, no signal: 4 mA Current draw, operational: Typical 25 mA Output voltage: 3 V RMS Distortion: 0,002% THD @ 3V output, 10 kohm load Clip point: 3,7 V RMS @ 14,4 V power supply Output impedance: 200 ohms nominal Input impedance: Ch. 1: 44 ohms, Ch. 2-4: 100 ohms, All channels are fully balanced Sensing modes: DC level or Audio, both operate on Ch. 1 only. Remote output: 12 Volts, max 100 ma max, protected against short term short circuit Indicators: Green= Remote on, Blue = Audio sensing active Reverse polarity protected.Summing output ch 3 + 4 for subwoofer amp when used with optional EBC DLS Nr. HLC4.2

Artnr.: CA-P10   
Performance RAW Mono Verstärker 1 x 450 WRMS

Preis auf Anfrage* , zzgl. Versand Details
Performance RAW Monoblock Amplifier 1 x 450 Watt   450 WRMS @ 2OHM 260 WRMS @ 4OHM P10 is a compact and powerful mono amplifier with peak music power of 450 Watts @ 2 ohm load. A popular and good raw power amplifier with high reliability. Built-in low-pass filter for subwoofers, variable between 50 and 200 Hz. With the filter disconnected the amplifier works as a fullrange amplifier. Built-in protection circuits shut down the amplifier in the event of overloads BASS BOOST switch, +6 dB. Remote bass level control is included High level input with automatic start. Cooling fan in the bottom plate. RMS output power @ 14,4 V Specifications Number of channels 1 Amplifier class AB Peak power 800 W Output power in 2 ohm 450 W RMS Output power in 4 ohm 260 W RMS Damping factor > 80 S/N ratio, A-weighted > 95 dB Frequency range 10 Hz - 30 kHz Low level output No Input sensitivity 0,25 - 5 V Input impedance 22 kohm Input impedance, high level 47 ohm High pass filter yes Low pass filter 50 - 500 Hz Grand bass filter Bass boost OFF - +6dB High level input with auto start Yes Remote phase shift control No Power consumption (idle) 0,5 A Remote bass level control Yes Power consumption (max) 50 A Integrated fan Yes Fuses 2 x 25 A Dimension (W x D x H) 189 x 322 x 51 mm / 7,44 x 12,67 x 2" Weight 3 kg EAN Bar code 7331644079101 DLS Nr. P10

Artnr.: CA-P20   
Performance RAW 2 Kanal Verstärker 2 x 70 WRMS

Preis auf Anfrage* , zzgl. Versand Details
Performance 300 W RAW 2 Channel Amplifier 2 x 70 Watt P20 is a small and powerful amplifier with a peak power output of 2 x 70 Watts. In 4 ohm mono bridge-connection, it puts out all of 200 Watts. Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz. The high-pass filter is also variable between 50 and 500 Hz. Built-in protection circuits shut down the amplifier in the event of overloads. High level input with AUTO-start function makes it easier to connect to factory installed head units. Bass EQ function in two steps, +6dB or +12 dB. SQ tuned in England! Specifications Number of channels 2 Amplifier class AB Mono bridge mode 4 ohm 200 Watt Output power in 2 ohm 2 x 100 Watt Output power in 4 ohm 2 x 70 Watt vid 0,1% THD Damping factor > 80 S/N ratio, A-weighted > 95 dB Frequency range 10 Hz - 30 kHz Input sensitivity 0,25 - 5 Volt Input impedance 22 kohm Input impedance, high level 47 ohm High pass filter 50 - 500 Hz Low pass filter 50 - 500 Hz Grand bass filter Bass EQ +6dB / +12 dB @ 50 Hz Low level output No High level input with auto start Yes Power consumption (idle) 0,4 A Power consumption (max) 25 A Rec. power cable 16 sq mm ( 5 AWG) Fuses 1 x 25 A Dimension (W x D x H) 189 x 210 x 46 mm ( 744" x 8,26" x 1,81") Weight 2 kg

Artnr.: CA-P40   
Performance RAW 4 Kanal Verstärker 4 x 70 WRMS

Preis auf Anfrage* , zzgl. Versand Details
Performance 600 W RAW 4 Channel Amplifier 4 x 70 Watt P40 is a small and powerful amplifier with power output of 4 x 70 Watts peak power, and in mono bridge-connection, it puts out all of 2 x 200 Watts. Built-in/switchable low pass and high pass filters. Bass EQ @ 50 Hz: + 6dB / + 12 dB. Built-in protection circuits shut down the amplifier in the event of overloads. Hi level input with Auto start Use it for a front system and a subwoofer. SQ tuned in England! Specifications Number of channels 4 Amplifier class AB Peak power 4 x 150 Watt Output power in 2 ohm 4 x 100 Watt Output power in 4 ohm 4 x 70 Watt Mono bridge mode 4 ohm 2 x 200 Watt Damping factor >80 S/N ratio, A-weighted >90 dB Frequency range 10 Hz - 30 kHz Input sensitivity 0,25 - 5 Volt Input impedance 22 kohm Input impedance, high level 47 ohm High level input with auto start Yes Remote bass level control No Low level output No Remote phase shift control No Grand bass filter Bass EQ @ 50 Hz: +6db / +12 dB Power consumption (idle) 0,5 A Power consumption (max) 50 A Rec. power cable 16 sq mm ( 5 AWG) Fuses 2 x 25 A Dimension (W x D x H) 189 x 322 x 46 mm (7,44" x 12,67" x 1,81") Weight 3 kg EAN Bar code 7331644079408

Artnr.: CA-P44   
Performance RAW 4 Kanal Verstärker 4 x 100 WRMS

Preis auf Anfrage* , zzgl. Versand Details
Performance 1000 W RAW 4 Channel Amplifier 4 x 100 Watt P44 is a small and powerful amplifier with power output of 4 x 100 Watts peak power, and in mono bridge-connection, it puts out all of 2 x 280 Watts. Built-in/switchable low pass and high pass filters. Bass EQ @ 50 Hz: + 6dB. Built-in protection circuits shut down the amplifier in the event of overloads. Hi level input with Auto start Use it for a front system and a subwoofer. SQ tuned in England! Specifications Number of channels 4 Amplifier class AB Output power in 2 ohm 4 x 140 Watt Output power in 4 ohm 4 x 100 Watt Mono bridge mode 4 ohm 2 x 280 Watt Damping factor >80 S/N ratio, A-weighted >95 dB Frequency range 10 Hz - 30 kHz Input sensitivity 0,25 - 5 Volt Input impedance 22 kohm Input impedance, high level 47 ohm High level input with auto start Yes Remote bass level control No Low level output No Remote phase shift control No Grand bass filter Bass EQ @ 50 Hz: +6db Power consumption (idle) 0,7 A Power consumption (max) 80 A Rec. power cable 16 sq mm ( 5 AWG) Fuses 2 x 40 A Dimension (W x D x H) 189 x 400 x 46 mm (7,44" x 12,67" x 1,81") Weight 4 kg EAN Bar code 7331644079408

Artnr.: CC-M224   
10cm Performance Coaxial - inline X-Over 50 WRMS

Preis auf Anfrage* , zzgl. Versand Details
4 inch Performance Coaxial 50 WRMS - inline X-Over Performance series M224 is a 10 cm (4") 2- way coaxial speaker with a 16 mm tweeter. Small installation depth, only 48 mm Polypropylene cone and rubber surround Crossover with 6 dB slope. Grilles are included. Specifications Woofer size 10 cm (4") Tweeter 16 mm (0,63") mylar Power handling capacity 50 W RMS / 75 W max. 150 W peak Impedance 4 ohm Frequency range 75 - 18.000 Hz Sensitivity 85 dB (1W/1m) Outer diameter of woofer 100 mm (4") Magnet size 80 mm (3,15") Mounting depth 48 mm ( 1,89") Mounting hole 97 mm (3,82") EAN Bar code 7331644825104

Artnr.: CC-M225   
13cm Performance Coaxial - inline X-Over 50 WRMS

Preis auf Anfrage* , zzgl. Versand Details
5.25 inch Performance Coaxial 50 WRMS - inline X-Over Performance series M225 is a 13 cm (5,25") 2- way coaxial speaker with a 16 mm tweeter. Small installation depth, only 43 mm Fibre glass cone and rubber surround Crossover has a 6/12 dB slope. Grilles are included. Specifications Woofer size 13 cm (5,25") Tweeter 16 mm (0,63") mylar Power handling capacity 50 W RMS / 75 W max. 150 W peak Impedance 4 ohm Frequency range 75 - 18.000 Hz Sensitivity 85 dB (1W/1m) Crossover Cable filter with 6/12 dB slope (LP/HP) Outer diameter of woofer 130 mm (5,12") Magnet size 80 mm (3,15") Mounting depth 43 mm ( 1,7") Mounting hole 120 mm (4,72") EAN Bar code 7331644822103

Artnr.: CC-M226   
16.5cm Performance Coaxial - inline X-Over 50 WRMS

Preis auf Anfrage* , zzgl. Versand Details
6,5 inch Performance Coaxial 50 WRMS- inline  X-Over Performance series M226 is a 16,5 cm (6,5") 2- way coaxial speaker with a 16 mm mylar tweeter. The small installation depth makes the speaker fit almost everywhere. Polypropylene cone and foam surround Crossover has a 6/12 dB slope. Grilles are included. Specifications Tweeter 16 mm (0,63") mylar tweeter Woofer size 16,5 cm (6,5") Power handling capacity 50 W RMS / 75 W max / 150 W peak power Impedance 4 ohm Frequency range 70 - 18.000 Hz Sensitivity 85 dB (1W/1m) Crossover Cable filter with 6/12 dB slope (HP/LP) Outer diameter of woofer 165 mm (6,5") Cone material Polypropylene, foam surround Magnet size 80 mm (3,15") Mounting depth 45 mm ( 1,77") Mounting hole 145 mm (5,7") EAN Bar code 7331644822202

Artnr.: CC-M369   
6x9" Performance Coaxial - inline X-Over 80 WRMS

Preis auf Anfrage* , zzgl. Versand Details
6x9" Performance Coaxial 100 WRMS - inline X-Over Performance series M369 is a 6 x 9 " 3-way triaxial with 25 mm silk dome mid driver and a 20 mm mylar tweeter. The bass driver has a cone of nonpress paper and rubber edge. Together with a powerful magnet system it guarantees a good bass control. Grilles are included. Specifications Woofer size 6" x 9" (165 x 236 mm Tweeter 20 mm (0,8") mylar tweeter, 25 mm (1") midrange Power handling capacity 100 W RMS / 150 W max / 250 W peak power Impedance 4 ohm Frequency range 45 - 20.000 Hz Sensitivity 88 dB (1W/1m) Crossover Internal filter Outer diameter of woofer 165 x 236 mm Magnet size 100 mm (3,94") Cone material Nonpress paper Mounting depth 86 mm ( 3,38") Mounting hole 155 x 221 mm (6,1 x 8,7") EAN Bar code 7331644822905

Artnr.: CC-M3710   
7x10" Performance Coaxial 3 Wege - inline X-Over 120 WRMS

Preis auf Anfrage* , zzgl. Versand Details
7x10" Performance 3 Way 120 WRMS- inline X-Over Performance series M3710 is a 7 x 10 " 3-way coaxial with 25 mm silk dome mid driver and a 20 mm mylar tweeter. The bass driver has a cone of woven glass fibre and rubber edge. Together with a powerful magnet system it guarantees a good bass control. Grilles are included. Small filter boxes with a 6 dB slope crossover. Specifications Woofer size 7" x 10" (180 x 250 mm Tweeter 20 mm (0,8") tweeter, 25 mm (1") midrange Power handling capacity 120 W RMS / 200 W max / 300 W peak power Impedance 4 ohm Frequency range 30 - 20.000 Hz Sensitivity 90 dB (1W/1m) Crossover External woofer filter with 6 dB slope Outer diameter of woofer 180 x 250 mm Magnet size 138 mm (5,4") Cone material Woven glass fibre with rubber surround Mounting depth 95 mm ( 3,75") Mounting hole 170 x 240 mm (6,7 x 9,45") Size of filter box Filter box L x W x H 120 x 65 x 32 mm EAN Bar code 7331644821809 DLS Nr. M3710i

Artnr.: CC-M524   
10cm Performance Coaxial - separate X-Over 60 WRMS

Preis auf Anfrage* , zzgl. Versand Details
4" Performance Coaxial 60 WRMS- Separate X-Over Performance series M524 is a 10 cm (4") 2-way coaxial speaker with a 20 mm silk dome tweeter that guarantees a fantastic sound quality in any installation. Separate filter box with high class components. Grilles are included. Specifications Woofer size 10 cm (4") Tweeter 20 mm (0,8") silk dome Power handling capacity 60 W RMS / 90 W max, 180 W peak power Impedance 4 ohm Frequency range 60 - 20.000 Hz Sensitivity 80 dB (1W/1m) Crossover Box filter with 6dB slope (HP) Outer diameter of woofer 102 mm (4") Cone material Coated paper cone Magnet size 80 mm (3,15") Mounting depth 60 mm ( 2,36") Mounting hole 97 mm (3,81") Size of filter box 73 x 36 x 35 mm EAN Bar code 7331644821908
Auswahl zurücksetzen
Automarke
Automodell
Baujahr
< Vorherige Seite
Seite 1 von 3
Artikel pro Seite: 20  25  50 
Nächste Seite >
*Alle Preise verstehen sich , Versand.

 
 
 
 
 
 
 
Wir liefern AUSSCHLIESSLICH an den Fach- und Großhandel. ENDKUNDEN werden von uns nicht beliefert!